Flag Heavy Duty Anti-Slip Floor Paint | Thermo-acrylic and polyurethane resins | Tough, durable, flexible and long lasting | Yellow | 5 litres

Product Information

Powerfloated or very smooth surfaces– Watco Powerfloat Primershould be used on very smooth or power floated surfaces. You may find that there are not enough colour options when choosing from the above products. Never fear, we have the answer! PPG Sigmacover 400 Bare concrete – remove surface laitance, dust and any light dirt or grease deposits using Watco Etch & Clean. Watco Etch & Clean also etches smooth, bare concrete surfaces to provide a key. Flush with clean water and allow surface to dry. For the removal of heavier deposits of oil and grease we recommend Watco Concroff, again, flush with clean water and allow the surface to dry.

In Yellow, Red, Grey and More Provides a safer slip-resistant coating for both residential and commercial environments.Bare Concrete– remove surface laitance, dust and any light dirt or grease deposits using Watco Etch & Clean. Watco Etch & Clean also etches smooth, bare concrete surfaces to provide a key. Flush with clean water and allow surface to dry. For the removal of heavier deposits of oil and grease we recommend Watco Concroff, again, flush with clean water and allow the surface to dry. We hope this article has helped to explain some of the yellow safety paint options available when looking for Anti Slip options. This extremely tough and durable single-component synthetic resin based paint is for interior use where Anti-slip properties are required. When it comes to applying anti slip paint, you need to consider a number of factors. For example, what is the substrate? Are any steps interior or exterior? Is the area exposed to the elements? Rustoleum Supergrip 7100 NS Centrecoat Anti Slip Additive for Paint can also be added to Rustoleum Supergrip 7100 NS (which we discussed earlier), to add additional grip. What If Paint Is Not An Option?

Here we are in the middle of another heatwave in the UK, and frosty days and nights are probably the last thing on your mind! But as we know, the Summers do not tend to last that long here. It won’t be long before the heating’s on again and everyone’s thinking about Christmas (too soon to mention it?!). With this in mind, now is a good time to plan ahead with anti slip yellow paint. Anti Slip Floor Paint makes a textured surface for interior floors. For use on large floor spaces that experienceelevated levels of public use, such as factories, hospitals and stations, it produces a rough, textured surface that comes already mixed. It gives an anti-skid surface and has excellent grip properties for both foot and light vehicle use. All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this ‘Best Ever Formulation’ to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of use For the smaller maintenance jobs, Rustoleum Supergrip Anti Slip also comes in a handy 500ml aerosol! Suitable for interior and exterior use on metal, wood, concrete, tile and parquet. Supergrip Aerosols can also be applied to steel, however you will need to prime the steel first with Rustoleum Hard Hat 2169 2182 Anti Rust Primers. Protecta-Kote Painting may not always be an option, or simply not the preferred method for creating an anti slip area. Don’t panic, there are other options available! Promain have a wide range of Anti Slip GRP Products to help.These durable coatings can provide an aesthetically rich finish, as well as meeting health and safety requirements, in a wide collection of colours for improved visibility for: If the paint is to be applied to coated floors (e.g. epoxy floors), we recommend you carry out a compatibility test to determine drying time and adhesion of the paint. As with Sigmacover 400, the aggregate can be added to the paint or hand cast over the applied coating. Heavy duty – priming is not usually required, but for open textured, or highly porous high suction surfaces, such as sand and cement screed, use Watco 4 Hour Epoxy Primer to ensure a uniform finish and to prevent air entrapment bubbles. Mixing (heavy duty) New asphalt & tarmac – should be sound and at least 3 months old. If any residual oils remain, the surface should be washed using Watco Concroff.

Protecta-kote Rubber Anti Slip paint contains rubber anti-slip granules, giving you an attractive tough textured appearance which is flexible, non abrasive and easy to clean. It is ideal for use on metal, concrete and fibreglass. As with Supergrip 7100NS, Protecta-Kote is suitable for both interior and exterior use. Please bear in mind that smooth or shiny surfaces such as marble, glazed tiles, or aluminium will require a primer. Protecta-kote Clear Primer should be applied prior to the application of the paint on these surfaces, to ensure improved adhesion. New concrete – as a guide, new concrete should be left for four weeks to dry in the summer and six in the winter. The surface should then be prepared using Watco Etch & Clean and thoroughly rinsed away and left to dry prior to applying this coating.Priming– is not usually required, but for very porous high suction surfaces, such as sand and cement screed, use Watco 4 Hour Epoxy Primer. Concrete should be sufficiently porous to allow the paint to penetrate, so very smooth or power floated concrete is unsuitable unless first primed with Watco Powerfloat Primer.