SONOFF Wi-Fi BasicR3 Switch Actuator

Product Information

Entering the Compatible Pairing Mode (AP) by long press the paring button for 5 seconds after power on

Note: SONOFF BASICR2 does NOT have 433Mhz RF receiver module. If you want RF function, please buy SONOFF RFR2 . Documents and once the webserver stops receiving GET requests, you know that it will then start flashing the firmware onto the device’s memory. data1={“subDevId”: “123456”,”switches”: [{“switch”: “on”,”outlet”: 0},{“switch”: “on”,”outlet”: 1},{“switch”: “on”,”outlet”: 2},{“switch”: “on”,”outlet”: 3}]} GNU/Linux distro installed on the host machine, preferrably apt-based distros, such as Debian or Ubuntu.

You may also like…

ATTENTION. From this part and on, the tutorial describes procedures that involve working with mains power. If you have not taken the necessary time to learn how to work with it safely, stop right now and ask for someone knowledgeable to assist and teach you. Do not take this warning lightly. Mains power can kill you or set your house on fire or both (or worse). Be safe.

txtvers=1”, “ id=[device ID]”, “ type=[device type]”, “ apivers=[device API interface version]”, “ seq=[TXT Record serial number]”, “ data1=[device information]”; This version of the device supports the new Itead DIY architecture which allows OTA firmware upload. The device was reviewed by DigiblurDIY in this video. Ghi chú: Sonoff Basic R3 không có module thu sóng 433 MHz. Tuy nhiên, nếu bạn có nhu cầu thì có thể xem xét sử dụng Sonoff RFR3 - một phiên bản tương ứng với Basic R3 nhưng có thêm tính năng điều khiển qua sóng vô tuyến RF 433. Here’s the BasicR3 with my )not quite long enough) replacement PCB button (the white glue is theirs, not mine). Long press the button for 5 seconds to enter pairing mode, then press another 5 seconds to ender Compatible Pairing Mode (AP). The LED indicator should blink continuously.Notice: I'm always happy to offer advice on stuff I've written - and indeed take advice. If I can help in any way just let me know but PLEASE don't ask me how to program in C/PASCAL/NODE/etc. There are many resources out there - if you want to program and can't - there's always Google. And you receive the status update that contains the most useful info about the Sonoff R3 status and the current configuration: {"seq":2,"error":0,

To turn the Sonoff R3 on/off simply submit the correct value to the URL: http://192.168.1.12:8081/zeroconfig/switch {"deviceid":"10008xxxx",Updated in September 25th, 2021.) When I first published this tutorial, I included instructions for BusyBox. Since then, however, I have had mixed results with it and switched to using Apache instead. More specifically, to create a minimal webserver using Apache to serve the tasmota-lite.bin firmware file to the Sonoff device, follow these steps: Wait for at least 2 minutes. When done, the Tasmota firmware should create a public wireless access point (WAP) with SSID called tasmota_*. Use a wifi-capable device and connect to the WAP. I’m not sure why such a convoluted way to something so simple, but I decided to roll with it. I changed the WiFi credentials and I could use this cumbersome tool to toggle the status ON and OFF. It was time to see if I can issue commands. The PCB has all components soldered to it, which means that was the matrix PCB for all Sonoff R3 series. The relay board comes with GI-1A-5DH relay capable of 10A. I wrote this tutorial for GNU/Linux users. That is, unless otherwise specified, the instructions assume that you are running a Linux distribution on your PC/laptop that will be used to interact with (and serve files to) the Sonoff device. If running iOS, you might be able to adapt the procedure more easily than if you were running Windows or other OS.

The operation failed and the request parameters are invalid. For example, the device does not support setting specific device information.Connect SPM-Main to your router using an Ethernet cable, and one of the following methods is available to connect. That said, it’s possible that this tutorial is partially or completely applicable to other Sonoff devices that can operate in DIY mode. The ones listed here are the ones that ITEAD listed as supported. Additional hardware requirements GPIO02 as a user configurable input is implemented in the Sonoff Basic module (introduced in 6.3.0.15). If you use GPIO03, you must use a device template (rather than selecting the Sonoff Basic module), and also disable serial logging ( SerialLog 0). To flash new firmware, use URL: http://192.168.1.12:8081/zeroconfig/ota_flash and push the correct firmware details: {"deviceid":"10008fxxx", September 25th, 2021, Update #1: Updated the curl commands to escape double quotation marks ( ") in the -d (HTTP POST data) argument. I also made other minor changes to improve command execution (e.g., setting up environmental variables for IP_SONOFF and IP_HOST), fix typos, and improve readability.