Specialist SHOWER TRAY/CUBICLE READY MITRED QUADRANT EDGING SEALING KIT STRIP KIT ALLOWS WATER TO RUN BACK INTO THE TRAY AND NOT DOWN THE WALL

Product Information

Wondering how to seal a shower tray or looking for top DIY tips on how best to apply silicone sealant? Room H2O’s expert advisors are here to help … The water in the bath acts as a weight (most baths settle slightly when filled due to the movement in flooring) and ensures that the silicone sealant will not stretch or tear when the tub is filled at bath time and the weight of a human is added. Apply the silicone sealant to the inner corner of the shower tray. Use gentle pressure to the trigger of the application gun and work towards the front of the shower tray in one continuous, smooth action to ensure application of a uniform silicone bead. Sealant application gun– this allows you to apply the sealant evenly and achieve a consistent bead. Whether it’s part of a bathroom makeover or you need to replace an old and damaged shower, knowing how to seal a shower tray is essential. And while it may sound like a daunting task, with a little care and patience, it’s a relatively simple project too.

Our fresh design principles, coupled with modern manufacturing techniques and carefully selected materials mean we are able to deliver mass-manufactured, robust, water-tight seals that have universal fit and an indefinite life span.

Trimlux Professional 25 (mm)

Let it dry. Most sealants take at least 24 hours to properly cure and become water resistant; once you’ve sealed the shower tray and are happy with the finish, leave it to dry properly before using the shower. Step 7 - Get a kettle or jug of water and pour it down the shower drain to see that it all flows through without any drips or leaks. Remove any dust and loose deposits with a vacuum cleaner, and then clean the shower tray surface and tiles with a damp cloth that’s been soaked in warm water and mild detergent. Starting at the same place you began to apply sealant, carefully and gently smooth it out – don’t apply too much pressure and don’t keep smoothing it once you have a smooth finish as this may damage the sealant and stop it working properly. Read through the instructions on the sealant before you start so that you know how long it will take to cure and how to get the best results.

In conclusion, sealing a shower tray is a crucial maintenance task that can help prevent water damage and keep your bathroom in excellent condition. By following these steps on how to apply shower tray sealant, how to silicone a shower tray, and how to remove old sealant from a shower tray, you can ensure a watertight seal that will protect your bathroom for years to come. Regular maintenance and inspections will help you catch any issues early and prevent costly repairs down the line.

TeleSeal Dimensions:

A properly sealed shower tray is essential to prevent water damage and maintain the integrity of your bathroom. Over time, the sealant around your shower tray may deteriorate, leading to leaks and potential structural issues. In this guide, we will walk you through the process of sealing a shower tray, including how to apply shower tray sealant, how to silicone a shower tray, and how to remove old sealant from a shower tray. Dip your finger in soapy water or use a specialized silicone tool to smooth and shape the sealant. This will create a neat finish and ensure a watertight seal. Be sure to remove the masking tape immediately after smoothing each section to avoid creating jagged edges. This MX Flexi Seal is for use in Bathrooms, Showers, Kitchens and other areas where a waterproof seal is essential. Starting in the inner corner of the shower tray and working towards the front, apply an even bead of sealant in one continuous movement. Take this slowly and steadily to ensure it’s even and there aren’t any gaps.

Make it neat – A sealant application tool, such as the Fugi by Cramer, will help you to achieve a neat and even bead of silicone sealant TeleSeal’s unique design enables it to be fixed to existing tiles or below new tiling, TelesSeal can even be fitted to misaligned tiles and deep grout joints and still provide the seal as desired. Strips are provided with pre-cut mitred ends to minimise installation time. Once you’ve got rid of all the old sealant, clean the area you’ll be working on – vacuum up any grit and dust, then clean the shower tray and tiles. As sealant won’t work on damp surfaces, make sure that they are thoroughly dry before you start work (we recommend having a cuppa while you wait for the surface to totally dry!).Cut the application nozzle on the sealant tube at a 45 degree angle, ensure the hole is not too big. The nozzle will have marks indicating where and how to trim the nozzle. A 5mm hole is typical for the majority of applications, but it can be enlarged if a wider bead is needed. Buy a good retractable utility knife. A sharp knife will be required for opening the silicone sealant and trimming the application nozzle to size.

Thoroughly dry the shower tray area with paper towel or allow the shower tray to air dry for a couple of hours before applying the silicone sealant, which will not adhere properly should any moisture remain. Wipe the surfaces clean where the strip will be attached first with a clean damp cloth allow to dry and then wipe with the IPA wipe supplied in the kit. Wipe away any excess sealant with a clean rag before it dries. If you accidentally get sealant on your tiles or shower tray, use a small amount of isopropyl alcohol or acetone to clean it up while it’s still wet. Step 9 - Run a bead of sealant first behind the tray between the wall and tray, to cushion the tray and as a primary seal against leaks. Apply a bead of sealant along the top edge and wall.Load the sealant tube into a caulking gun and squeeze the trigger to apply a steady and even bead of sealant along the joint between the shower tray and the tiles or wall. Keep the pressure consistent for a smooth application. Work in small sections, approximately 12-18 inches at a time, to ensure you have enough time to shape and smooth the sealant before it starts to set. The nozzle of the silicone sealant tube will usually feature perforated marks to indicate where and how to trim the nozzle but a good rule of thumb is to cut at a 45-degree angle and create a 5-6mm hole in the end of the tube, which can be enlarged if a wider bead is required. Remove protective film from the edge of the tray to which the seal strip is to be attached but leave it over the base of the tray to protect the trays surface during installation. Once you’ve completed each line of sealant, release the pressure from the application gun or it will continue to flow from the nozzle. Wipe the excess away and replace the cap. Give the area a final wipe down with a clean damp cloth to remove any residual detergent but do not get the area wet.