micro:bit BBC MB V2 GO V2 Go - Complete Starter Kit

Product Information

Pro představu, co se s kitem dá realizovat, jsem popsal základní součástky. V balení najdete samozřejmě i propojovací vodiče, kontaktní pole, nějaké odpory, bzučák, držák baterií AAA s vypínačem, USB propojovací kablík, RGB LED a další. Součástí je také kompaktní krabička pro uložení drobnějších součástek.

Insert the micro:bit into keyestudio micro:bit sensor V2 shield. Then connect the Ultraviolet sensor to the shield. Connect the signal pin to Analog P0. Insert the micro:bit into keyestudio micro:bit sensor V2 shield.Then separately connect the active buzzer and crash sensor to keyestudio micro:bit sensor shield. Shown as below diagram.

Přihlaste se prosím znovu

The light breath experiment is a little bit similar to the previous project. This time we connect the keyestudio LED module to the sensor shield. Connect the Signal pin of LED module to P0 of micro:bit. From the Pinout diagram of microbit, you can get the P0 can be used as Analog IN. This lesson you will learn how to control the brightness of LED on the module, gradually becoming brighter and dimming, just like the LED is breathing. Insert the micro:bit into keyestudio micro:bit sensor V2 shield.Then separately connect the buzzer and flame sensor to keyestudio micro:bit sensor shield. Shown as below diagram.

The Kitronik Inventor's Kit for the BBC micro:bit is a great way to get started with programming and hardware interaction with the BBC micro:bit. This Inventor's Kit contains everything you need to complete 10 experiments including using LEDs, motors, LDRs and capacitors. In the above project 8, we have done a button control experiment. This time, we are going to replace the button switch with a capacitive touch sensor. In this project, you will learn how to use keyestudio touch sensor to control 5*5 LED of micro:bit show different images.

What happens if I need to return something?

Insert the micro:bit into keyestudio micro:bit sensor V2 shield.Then connect magnetic sensor to micro:bit sensor shield, connect S pin to S0 pin header, + pin to V1 header, - pin to ground. Shown below. In this project, you will learn how to use a soil sensor and micro:bit to detect the humidity of your plants’ soil. Display the analog value on the micro:bit LED matrix or on the serial monitor. The greater the humidity, the greater the analog value. Its response to visible light illumination is similar to that of the human eye, so it can judge the intensity of ambient light. But note that it does not react well to IR or UV light. In this project, you will learn how to play music with keyestudio passive buzzer module. We are going to complete two experiments. Done wiring and powered up, send the code to MICROBIT. You can place a magnetic bead near the sensor. When the sensor detects a magnetic field nearby, you should see the LED matrix of micro:bit show the icon like a heart. Or else, it will show the icon like this.