Drayton DIGISTAT +3 22083 7 Day PROGRAMMABLE Room Thermostat

Product Information

In addition to its heating control functions, the Digistat+3 has a built-in frost protection feature that ensures the temperature never drops below a certain threshold, preventing freezing and potential damage to the heating system.

Yes, there is a Digistat to suit both types of boiler – try our product selector to find the right one for you. How do you boost? The Digistat remembers the last BOOST so if you always use the same parameters just press the O button once. Simple! The thermostat also features a "holiday mode" that allows users to set a lower temperature while they are away, further improving energy efficiency. Depending on the fuel type you select during installation will affect how Digistat works with your boiler/heat source - so ensure to select the correct type during installation. Does Digistat work with combi-boilers and conventional boilers?The Digistat+3 features a simple and intuitive interface, allowing users to easily adjust the temperature according to their preference. It has a digital display that clearly shows the current temperature, as well as the set temperature.

To swap between Heating and Hot Water on the thermostat press the setting button (cog symbol) to open this open. With its advanced programming capabilities, the Digistat+3 allows users to set different heating schedules for each day of the week. This can help to optimize energy consumption and reduce heating costs. There may be other Digistats powered up and within range and this will slow down the pairing process. If it is possible to depower the other Digistat please do this while you are pairing, or if not then press “I have done these steps” and wait for the RETRY button to appear. On the second attempt the pop-up should appear instantly. When used with a gas boiler the Digistat will automatically cycle the boiler to help your boiler to run more efficiently and save you 10% on your heating bill (compared to a simple ON/OFF thermostat).There are known issues using Bluetooth with some later Apple devices. However the RETRY button should allow you to pair your Digistat within a few attempts. When used with a Heat Pump the Digistat will protect the compressor by reducing cycling to 3 cycles per hour, to improve the life of the compressor. These settings appear in the installer menu and it is important to select the setting for your heat source: gas boiler (default), oil boiler, heat pump, or electric heating

Preset 3 provides heating all day long How is Digistat suitable for visually-impaired tenants/homeowners? The Drayton Digistat+3 is a thermostat designed for controlling heating systems in residential and commercial buildings. It is manufactured by Drayton, a well-known company in the field of heating controls. Green Premium is the Schneider Electric eco-mark that brings more value to our customers and more growth to our company. When used with electric heating the Digistat cycles the heater at 12 cycles per hour to maintain room temperature and save money. Yes, there is a Digistat to suit both types of boiler – try our product selector to find the right one for you. Do I need an OpenTherm boiler to use Digistat?This option has no schedule and controls by temperature only. You set your preferred temperature and adjust it with the + and - buttons.