LeTkingok 50x50CM Concrete Vibrating Table, Vibration Test Bench Test Block Vibration Platform Stainless Steel Mini Vibration Table

Product Information

Chen LL, Lian H, Liu Z, Chen HB, Atroshchenko E, Bordas SPA (2019) Structural shape optimization of three dimensional acoustic problems with isogeometric boundary element methods. Comput Methods Appl Mech Eng 355:926–951 Then level the mix off using a trowel. This gives a smooth and level base for a professional finish. Then start to fill your mould with concrete slowly in one-spot. Which allows the table to spread the mix into the mould. A vibration table consists of a rigid table top supported by a vibrating base. The vibrating base is typically driven by an electric motor or pneumatic actuator, and is capable of producing a wide range of vibration frequencies and amplitudes. The test item is placed on the table top, and the table is then subjected to a series of vibration tests to simulate the conditions that the device may experience in its intended operating environment.

Here at LabQuip Ltd, we are able to manufacture any size vibrating table to suit your needs. The tables are made from solid steel and finished with a coat of paint. Ji JB, Wang CG, Yan WM (2019b) Study of shaking table substructure test loading by TMD device. Earthq Eng Eng Dynam 39(4):98–104 Wang XY, Wang HL, Yang WS, Xu WX, Yu DH (2020) Application of substructure technology in structural seismic test. World Earthq Eng 36(1):63–76 Tian SZ, Wang B, Cai XJ (2013) The method for substructure shaking table test with rubber-mass system. Earthquake Resistant Engineering and Retrofitting 35(5):132-135+139 Gao CH, Yuan XB, Wang JQ, Zhang YH (2020) Recent progress on control techniques of shaking table and array systems in China: an overview. Am J Civil Eng Arch 8(3):119–130Tsai YC (2018) Research of control algorithm for seismic simulation shaking table. Tsinghua University Leaving the mould on the table shall then allow the air bubbles to escape by coming to the surface. If you need a Vibration Platform or Vibration Table you need to call us on Ph: 01159309068 and discuss the application, there is rarely a situation which we can't provide help with. I guess you could say we are Vibration Experts. Xu GS, Zheng ZY, Yang KB, Tan XJ, Wu B (2015) Application of equivalent force control method to shaking table substructure testing of structure with TLD. Earthq Eng Eng Dynam 35(5):113–119

Luan QL, Chen ZW, Xu JR, He HN (2014) Three-variable control parameter tuning technology on seismic simulation shaking tables. J Vib Eng 27(3):416–425 Xie W, Sun LM (2018) Experimental studies on a large-scale full model of a super long-span cable-stayed bridge by using shaking table array system. China Civil Eng J 51(8):47-59+80 Gao CH, Yuan XB (2019) Development of the shaking table and array system technology in China. Adv Civil Eng 2019:1–10

Contact

Xu Y, Cui CY, Zeng Z, Zeng SJ (2021) Shake table experimental study of cable-stayed bridges with two different design strategies of H-shaped towers. Earthq Eng Eng Vib 20(2):483–493

Vibration tables are widely used in a variety of industries, including aerospace, automotive, military, and electronics, to ensure that products are reliable and able to withstand the stresses of their intended operating environment. To reduce noise of the mould tapping on the table, a piece of carpet can be glued to the table top. A release oil should be used on Plastic, Metal, Fibreglass Moulds before being filled. The machine must be located on a safe place and on a horizontal position. Make sure there is sufficient air where you position the machine. It is duty of the user to ensure that the electric plant is in accordance with the safety laws in force. It is particular important to make sure that the grounding is well efficient. Furthermore, it is important to verify the network voltage: in case the voltage is too low (lower than 210V), the engine will start too slow and it might be necessary to install a voltage stabilizer. After having placed the vibrator and gone through the above due verifications, follow these instructions:  The general switch must be in the OFF (0) position.  Connect the power supply plug to a 220-230 V AC outlet.Yan Q, Mao ZL, Wang LJ, Tang P (2021) Study on shaking table model test of high-speed railway subgrade with active fault vibration and fracture. J Central South Univ (Science and Technology) 52(3):913–924

Wei H (2020) Robust active disturbances rejection control strategy of electro-hydraulic shaking table. Dalian Maritime University Jin X, Xun Y, Hu XM, Cai WH (2020) Shaking tables test study on seismic responses of mega-frame vibration reduction suspended structures under multi-support excitations. Earthq Resist Eng Retrofit 42(1):112-119+125 Gao CH, Yuan XB, Wang JQ, Zhang YH (2021a) Parameter setting of shaking table based on particle swarm optimization. Chinese Hydraul Pneum 2:114–122Zhang JQ, Jiang XL, Yang H, Zhao FF, Liu Y, Shi HT (2021) Study on seismic response characteristics of slope with double-arch tunnel. Chinese J Appl Mech 38(2):597–606