Ruida Controller 400x400mm Working Area 50W CO2 Engraving Cutting Machine

Product Information

Jog Distance is 0, please reset - This error appears to be a bug in the KT332N Ryxon/Ruida Controllers running DSP firmware 23.01.06. When the Move Mode is placed in Manual, the X, Y, and Z jog controls no longer operate and this error is generated. The work-around is to toggle the Move Mode to Continuous (this is done by pressing the Jog/Continuous button, which is the large circle between the arrow keys). All outputs are isolated through the optocoupler, and 500mA current for each, OC gate output, each can directly drive the 6V/24V relay, led lamp, buzzer etc. Raster image processing: RDWorks also supports the import and editing of raster images, such as JPG and BMP, for use in laser engraving applications. Navigating the Ruida controller is a breeze, thanks to its intuitive user interface. The well-organized menus, clear icons, and straightforward controls allow users to easily access and adjust laser settings. From defining cutting paths to adjusting power and speed, the user-friendly interface ensures a seamless experience and streamlines workflow.

Control Mode: Double-pulse or direction + single pulse are optional; in general, direction + single pulse is selected. Ultimately, the choice between LightBurn and RDWorks will depend on your specific needs and preferences. If you are looking for a free software program with basic laser cutting and engraving capabilities, RDWorks may be a good option. If you are willing to pay for a more feature-rich program with a user-friendly interface, LightBurn may be a better choice.PC-USB is a USB-BM interface. The controller may communicate with PC by this port. Ethernet Interface A step pulse is a transition from low to high, or high to low. The controller will hold the line low, and pulse it high, or hold the line high, and pulse it low. The transition itself is what matters, and motor drivers will either look for a transition from low to high (rising edge) or high to low (falling edge) to accept as a ‘Step’. Now, there are three ways that you can connect to the machine and get your programs from the computer into the brain. The Ruida DRC6445S and DRC6445G are both laser controllers used for CO2 laser cutting or engraving machines, but there are some differences between them. Key Acceleration: it means the acceleration to move this axis by way of the keys on the keyboard, which can’t be higher than the maximum acceleration of this axis.

RDWorks is compatible with Windows XP through to Windows 10. It is important to note that it is not used for creating complex designs, and is most useful when used in tandem with graphics programs like CorelDRAW, Adobe Illustrator, AutoCAD, Inkscape or 2D Design. If feeding line-by-line: if enabled feeding line-by-line function, the virtual array graphics on Y direction will be processed in the same position.Focus Setting: it means the distance from the focal point of laser head lens to Z-axle origin. When there is no automatic focusing function, this parameter becomes invalid. Now, use the 'Frame" button (shown above, near the 'Start From' setting) and see how big it frames. If it's barely moving, your step size is too big (the controller thinks it is moving more than it is). If it moves way too far, the step size is too small (the controller thinks it has to take lots more steps than necessary). The Ruida RDC6442S features a USB interface, which allows for easy transfer of data from a computer to the controller. It also has a dedicated DSP processor, which ensures that the laser head moves smoothly and accurately during the cutting and engraving process. So the controller I have is Ruida RDC6442S-B(EC) I found one other thread talking about this but it didn’t seem to go anywhere. If we take a look at where these wires go to, you’ll see that some of these go to the motor driver X and the motor X, the driver Y and the motor Y.