Roland Tr-6S Compact Drum Machine

Product Information

We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document. If you are using a SD card to perform the update, carry out the procedure while no USB cable is connected to the TR-6S.

Please install the extracted system program file into your TR-6S according to the following procedure. Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden. Create punch, space, warmth, or grit with the array of high-quality effects in the TR-6S. Vital compressors and EQs are at your fingertips, along with lush reverb, delay, and modulation effects. Push your creative boundaries with filters, LFOs, and wild new effects that incite sonic mayhem.b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License. In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages. The maximum length of a single audio file that can be imported is approximately 180 seconds (at 44.1 kHz). If "Updating Panel" appears, wait until the message "Completed" appears on the display, then reset the power again. Never apply this update data to any product other than the TR-6S. This update data may destroy the data or system program of other products.

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK. a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE. There’s a Sensitivity threshold setting that’s worth experimenting with, according to what sounds you’re using. And finally, there’s a Comp + Drive setting, which combines compression and overdrive into one effect. 10. Get a Reload of this Never turn off the TR-6S's power while the update is in progress. Otherwise the system program or the TR-6S itself may be destroyed. c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.The sound of today's music owes a lot to the classic step-sequencer—particularly the "TR-REC" variety found in early Roland drum machines. The TR-6S employs the same tried-and-true approach, enhanced with realtime recording and modern features like sub-steps for ratcheted parts and motion recording for rhythms that move. Kit, instrument, and pattern reload is now possible with a two-button press, similar to the Reload function on the Elektron kit. Simply press Utility + Kit, Instrument, or Pattern Select to revert to the saved version of the item. This can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use. a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof. Please note that when you execute "ALL" or execute "KIT" or "PTN," then depending on the selected parameter, created presets and the settings on the TR-6S are returned to their factory-default state.

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose. Press the [ UTILITY ] button and use the cursor buttons to select "Factory Reset," then press [ VALUE ] knob. To keep the TR-6S's settings unchanged and return only Kits or Patterns to their factory defaults, select "KIT" or "PTN." The TR-6S is a also a high-quality USB audio/MIDI interface, perfect for mobile or minimal production setups. And it fits in even the most space-starved studios or live rigs, so you can turn life into music whenever inspiration strikes.The sound of today's music owes a lot to the classic step-sequencer—particularly the “TR-REC” variety found in early Roland drum machines. The TR-6S employs the same tried-and-true approach, enhanced with realtime recording and modern features like sub-steps for ratcheted parts and motion recording for rhythms that move.