Joined in 2023 
82 
63 About this deal
Once you’ve washed your 3D print, you also need to cure the model. Curing is a post-processing technique that involves using Ultraviolet (UV) light to further solidify the printed resin of your model. Experiment with this setting once you get comfortable with resin 3D printing and get consistently good prints. See if you can determine the minimum lift height needed to peel the model off the FEP. By lowering this setting, you can significantly shorten the duration of your 3D printing sessions. Lift Speed Here are a few popular YouTubers that talk about their experience with “Vroom” settings in resin 3D printing: Uncle Jessy, 3D Printing Pro. Resin manufacturers tip Therefore, we compiled the most comprehensive guide on resin 3D printing settings, explaining what means what. We used terminology from the most popular slicers: Chitubox, Lychee, Voxeldance Tango, Prusa Slicer, and Z-suite. Hopefully, this will allow you to have a broader picture of what you can control and make better decisions when running your prints or troubleshooting failed ones. The calibration part is your best friend
Do you 3D print jewelry? The models could be so intricate that you would have to use proper exposure. As well as a few very thin supports and very slow lift speeds. Store resin bottles away from light sources at room temperature between 15-35°C / 59-95°F. Cold temperatures can increase resin viscosity. Of course, there are a few control tools, including two knobs/buttons for setting the timer and controlling the heater inside the machine. You don’t need the second feature, but it’s always better to use warm water/solvent liquid than cold.Use whatever retract speed your 3D printer manufacturer recommends. Usually, it is between 150–400 mm/min. This speed rarely has any impact on the quality of your prints. A wash machine (no, not the laundry one) does this by soaking your model in either water or a solvent, like acetone, depending on what type of resin you used (some are water washable). These substances are great for separating liquid resin from the surfaces of your solid print. Curing Source: Youtube Uncle Jessy Consider the build volume. Will your printer be able to print in larger parts or in thinner layers?
First off, the device works with a base structure and a permanently-attached plastic washing cover. Inside the cover is a removable basket that lets you put the prints inside and move them without getting your fingers on them, which can hurt the quality of the model. On another note, the base of the SL2 has rubber feet. This keeps the noise of the moving motor down so it won’t distract you from whatever you’re doing nearby. After printing, wash models with 95% isopropyl alcohol or higher concentration. Use a brush to clean intricate details. For water washable resins, rinse under water for 1-2 minutes. For highly detailed prints, use an ultrasonic cleaner for 1-2 minutes to achieve optimal results. Allow models to dry fully before handling, using a hair dryer to speed up drying time. Finally, post-cure models under UV light for maximum material properties.On this note, the base structure of the Wash and Cure 2.0 has a motor that splashes the water/solvent around during the washing process and also spins your part for the curing stage. This yields both a better wash and a better cure of your print because every part of your model will be properly post-processed.
Finally, the quality of 3D prints depends not only on layer height but also on the XY resolution of your 3D printer. This XY resolution is the pixel size of a 3D printer’s LCD screen or DLP projector, or a laser spot size in a laser based 3D printer. Usually, it is between 20 μm and 90 μm. In other words, even if you print with very thin layers, the quality is still limited by the fixed XY resolution of your 3D printer. So consider that when choosing the right layer height. Clean the filament. Before placing your filament in the printer, it needs to be washed to remove any dust or other debris. To clean the filament, use a brush and warm water. First of all, not every 3D printer supports this setting. So don’t be surprised if it does not make any difference, even if you set something there in the slicer. However, you only need to lift the build plate high enough to peel the model from FEP. So when the second lift stage would be useful is not clear. The next ABS-like resin you should consider buying is the Siraya Tech ABS-Like Resin. I like this resin because it has many good properties such as:
6. JAYO ABS-Like 3D Printer Resin
One user who 3D prints miniatures did mention that the results are great but the models can still be brittle if you drop them on the floor from a table. I’d recommend adding in some flexible resin to provide durability to your models.
High Precision & High Toughness】Many 3D printing enthusiasts like to use JAYO Plant-based UV Resin to make character models because it has high precision, which can increase the level of detail. Plant-based Resin has the characteristics of high toughness and low brittleness, which can avoid breakage and print more smoothly. Some 3D printers have the option to change the output power of their LEDs. This means that the LEDs can produce more UV light; thus, the resin could cure faster. What UV Power should you use? All in all, you should experiment with this burn-in layer exposure time setting. Start with a longer exposure value and print something. If it is extremely hard to remove the model from the build plate, it may indicate that your exposure is too high. Lower it and try again.What many customers love about this ABS-like resin is that it emits low odors. They are also satisfied with the quality of their prints. Essentially, this setting allows adding a delay to the exposure after the build plate retracts to its lowest position. Right after the build plate reaches the bottom, it stops, and the system waits for this pre-defined duration. Only after this pause it turns on the light source and starts the exposition of the new layer. After retracting, this rest time brings more time to fully squeeze resin out of the gap between the model and FEP. What Rest Time After Retract should you use? We recommend leaving the default setting that was on the printer when you initially received it. Resin manufacturers tip Lift height is the distance the build plate moves up between layers to separate the printed model from the FEP. What Lift Height should you use? Do you 3D print pre-supported miniatures? Usually, supports are very thin on these. As a result, you might not have much choice but to increase exposure and print slowly or add a few additional supports.
Great Deal 
New Comment