Aico EI1529RC Hardwired Smoke Alarm Remote Test, Hush & Locate Switch , White

Product Information

Hush, silence the alarm: Will silence nuisance alarms for approximately 10 minutes before automatically resetting

Easily installed via a 3 wire connection of live, Neutral and Interconnect/Control (as standard smoke/heat alarm wiring).

If You Have An Item To Return

Easy to install using a 3 wire connection (Live, Neutral and Interconnect/Control) as standard smoke/heat alarm wiring I have used Fastlec three times each time I have found them to be efficient fast and happy to give you information on their products." This mains powered accessory increases the flexibility and user friendliness of the alarms by allowing the user to remotely Test, Locate and Silence alarms in the system: All alarms on the system will sound. This is the equivalent of pressing the test button on each individual alarm

Silence Switch: Allows the user to silence all interconnected Alarms at once for 10 minutes in case of false alarm. Locate Switch: If the Alarms are sounding, pressing the Locate Switch silences all but the originating Alarm, thus allowing easy identification of the source of the alarm. Remote test and hush switch specifically designed for use with the Ei161RC, Ei164RC or Ei166RC, and with the Ei2110 series. Aico EI1529RC Mains Powered Remote Control Switch - functions Our goal is to provide one stop place for electricians and electrical contractors, but we are happy to help other clients too. Carries the CE mark to indicate conformance to Low Voltage and Electromagnetic Compatibility DirectivesWall mounted for ease of use – can be fixed with surface mount box supplied, or will fit a standard recessed box (not supplied) Mains powered Ei Electronics smoke and heat alarms require a 230V AC power supply and up to 12 alarms can be hardwire interlinked in one system. Up to 4 x EI1529RC switches may be installed together with a maximum of 20 x 2100, 160RC and 260 Series smoke, heat or carbon monoxide alarms

Carries the CE mark to indicate conformance to Low Voltage and Electromagnetic Compatibility Directives. Compiles with electrical safety requirements: EN61000-6-1:2007 Et EN61000-6-2:2005 (EMC Directive) and EN60065:2001 + A12:2011 (Low voltage directive). The Ei1529RC is used to control all the alarms in a system from one place. We highly recommend fitting a control switch if you have smoke, heat and carbon monoxide alarms on the same system as it’s essential that you can tell which alarm has sounded. From then you can identify which danger is present and the action you should take. The triggered alarm can be audibly identified - and silences all others - automatically resetting after 10 minutes

Ideal for elderly or vulnerable users, the wall-mounted switch tests, locates or silences your interconnected smoke alarms from an easily accesible low-level position. This item is guaranteed for five years.