REJS Metal Garden Bench Ends-BLACK

Product Information

Let me talk you through how I did it and what tools you can use and how long it should expect to take. Tools I Used (+ Suggested Alternatives)

ALSO, I recommend using direct to rust paint that is a primer and paint in one. How to Restore an Iron and Wood Bench The type of wood you choose will make a huge difference in how long it lasts. You could opt for softwoods and even pallet wood, but it won't be as strong and will require regular treating while out in the elements.Now, remember when I said keep hold of the old wood? Well, now you need to line them up with your newly cut ones and mark where the bolt holes are. This can be quite the juggling act if you're rebuilding your newly restored garden bench! I recommend pushing one end against a wall so you can slot and bolt your first wooden bench slat in so it's stable with the rest. BUT, if yours is ALL wooden bench slats, then slot them all in first after the initial one and THEN bolt it all up. If not, you'll struggle to get the last few in on an angle and will need to unbolt some. Making Your Park Bench More Stable I recommend drilling with a small drill bit first for better accuracy, then move on to a bigger one. Building the Garden Bench with Cast Iron Ends See note 2 above in bold regarding substitutes for a table saw. Adding a Profile Edge to Your Bench Slats

Avoid products that simply don't say preservative or preserver on the label. My Dad informs while staining my fence panels it's just coloured water. Also, once stained, you'll need to keep it up when it fades. Painting Cast Iron Bench Ends I know angle grinders can be quite intimidating to remove the bolts. Especially the sparks, so it's vital you wear PPE. However, you could: Something my Dad keeps telling me is to look for a rusty old cast iron garden bench with wooden slats around car boots. Apparently, many won't or don't know how to restore cast iron garden furniture. When restoring a bench with rusty cast iron, my tip is to think first regarding the type of metal paint you're planning on using.

However, I think regular cans of paint are cheaper to use, reduces waste and are less harmful on your lungs and environment. Drilling Holes for Wrought Iron Bench Wood Slats While you have easy access to the end grains (the thirsty bit of wood), I highly recommend to take the time now, to treat your bench slats. With some planning, you can spray the bolts with WD-40 penetrant the night before to work into the rust and repeat on stubborn ones. You'll also need spanners or anything to grip the nuts while unscrewing bolts.