Rapid Racer Products RRP ProGuard Bolt-On Front Mountain Bike Mudguard

Product Information

Finally tighten the bolts to the torque settings below: TORQUE SETTINGS: FOX, MARZOCCH & OHLINS = 1nm | SR SUNTOUR = 2nm The perfect guard for enduro or downhill racers and essential for weekend warriors looking for the very best protection whilst maximising tyre clearance and reducing the mud clogging issues seen with other mudguards of this style. Select the correct bolts for your fork (details below) and run these into the threads WITHOUT the mudguard which will 'PRIME' and clean the threads before fitting, this part is important (YOU MAY NEED TO RE-TAP THE THREADS IF DEBRIS / PAINT IS LEFT IN THE THREADS FROM THE MANUFACTURE OF THE FORKS) BOLTS: FOX = M3 (2 bolts) | OHLINS = M4 (3 bolts) | SR SUNTOUR = M6 ( *1 bolt)

Important - The snap-off hole will break off fast so ensure thre is nothing underneath the guard that the screw driver can hit, failure to do so may lead to damage or harm Tires up to 3 inches are said to work with it (Tested with a range of 2.5-inch tires from Maxxis and WTB) The granting of a best price is not combinable with other promotions (e.g. "free articles) from Bike-Discount. Our widely acclaimed Seal Shield has made it to the PROGUARD as a means of offering greater protection for your seals from high velocity mud and spray, the Seal Shield section also provides additional strength and rigidity to the rear reducing flex MAX PROTECTION VERSIONDelivery timescales are esimates in working days; Public Holidays, Saturday's and Sunday's are NOT classed as working days. RapidRacerProducts Ltd accepts no liability for any damage / injury caused due to improper fitting / use of our products Chain reaction Cycles and CRC are trading names of Wiggle Ltd (In Administration) registered in the United Kingdom at 1000 Lakeside, Suite 310, Third Floor N E Wing, Portsmouth, Hampshire, PO6 3EN, DUE TO THE CURRENT HIGH DEMAND, DELIVERY TIME FOR BIKES IS 7-10 DAYS. ALL PARTS AND ACCESSORIES ARE STILL 1-2 DAYS.

Tom didn’t get any shit in his eyes all winter, no glasses, super wet, crazy muddy, nothing on face, it will protect you and your bike from the very worst of conditions Enduro-mtb Magazine review Squeeze the side wings of the mudguard hard and slide under the fork brace from the rear with the wheel and tyre still in place Forks: This direct mount mudguard is designed for the forks listed below ONLY IF THEY HAVE Threaded holes in the rear of the fork brace Fits Fox 32, 34, 36, 38, *40 (2021) 49 Standard: 503mm long - 130g (without bolts) COMPATIBILITY WHEELS: 26” 27.5” 29” TYRES: up to a 3” tyre OFFSET: MINIMUM FORK OFFSET 44mm HUB: STD & BOOST FORKS: If you find an item at a lower price with another commercial internet retailer, you will receive it from us at the same price, provided the conditions listed in the link are met.

We Price Match

Both fenders perform great and have mostly been set and forget items. Aside from the occasional extra flex of the Standard, they go unnoticed but you'll make note of the clear vision they provide. This mudguard design is perfectly suited for the rigours of modern mountain biking. It ensures superb all-weather protection for anything from Enduro and Downhill racing, to weekend Trail sessions with friends. And, since it’s made from RapidRacerProducts’s unique polypropylene, it gives a superbly flexible and ultra-durable performance at a low weight. RapidRacerProducts Ltd accepts no liability for any damage or injury caused due to improper fitting or use of our products

Use the Allen key provided to screw the bolts in EVENLY a bit each side, go gentle to start off to ensure you DON'T CROSS THREAD THEM, stop once it's pulled together so you can still move it As a result of achieving the above properties it means that the surface layer is soft and will scratch easily, you must also be careful about putting any chemicals onto the surface as it may tarnish the finish. That said we have tested and can recommend the following chemicals to use: COMPATIBILITY WHEELS: 26” 27.5” 29” TYRES: up to a 3” tyre FORKS: All forks including Boost forks (except reverse arch) TRAVEL: Any travelThe ProGuard - BOLT ON is our direct mount front mountainbike mudguard designed for big spray and mud protection (DISC BRAKE ONLY) Finance is subject to application, financial circumstances and borrowing history. Performance Cycling Limited FRN: 720557 trading as Tredz are authorised and regulated by the Financial Conduct Authority. We are a credit broker not a lender – credit is subject to status and affordability and is provided by Mitsubishi HC Capital UK PLC. Terms & Conditions Apply. Then feed cable ties through teh sames holes from the rear to the front (you must use min 5 cable ties to ensure the guard is secure) I have been using the RRP ProGuard on a few mountain bikes for several months. The performance has been excellent, with a vast improvement in the amount of spray and mud that comes off the front wheel reaching the face and body with the most noticeable area when riding at higher speeds where mud can spray out in front, which you would normally ride into it. The best mountain bike mudguard currently available on the market is the RRP ProGuard Max Protection Mbr Magazine (Feb 2020)

Our special polypropylene mix has been specifically blended for super high impact resistance and cold weather performance: You should be able to locate the mudguard and let go as the rubber side pads should hold it in place (ensure the slots are centrally aligned to the threaded holes on your fork)Delivery timescales are based on working days; Public Holidays, Saturday's and Sunday's are NOT classed as working days. Once happy you must tighten the cable ties with fat pliers as tight as possible (remember cable ties don’t’ scratch forks….loose cable ties do!)