Lithofin MN Stain-Stop Impregnator Sealer For Artificial & Natural Stone 250ml

Product Information

Advice: Remove stain causing materials from impregnated surfaces immediately. For regular maintenance of kitchen counter tops we recommend Lithofin MN Easy-Clean. Lithofin Stain Stop is for invisible protection against staining and for facilitating maintenance of all natural stone surfaces, including polished marble. It is UV-resistant and does not yellow. Lithofin Stain Stop PLUS is for making absorbent ceramic, terracotta, natural- and engineered stone surfaces stain resistant and at the same time intensifying their colour structure. Working in small areas (10 to 15m 2) apply product generously and evenly until the surface appears wet.

Advice: immediately remove stain causing substances. For regular maintenance of floors we recommend MN Wash & Clean, for kitchen counter tops MN Easy-Clean. Application Temperature: the temperature of the surface should be between 10°C and 25°C. Avoid working in direct sunlight. Switch off under floor heating.Attention! the liquid product must sink into the stone. Do not allow the product to dry on the surface. Wipe off excess product within 15 min. Sponge Machines & Ancillaries We supply a range of indoor & outdoor sponge machines from Refina & Berta which are suitable for cleaning epoxy & cement grouts such as UltraScape Flowpoint from quarry tiles, external paving slabs, natural stone and granite setts. Our range of sponge machines protects the joints between paving slabs by avoiding washing away the cement, whilst the machine removes the need for individuals to wash away grout on their hands and knees. Perfect for use on wall and floor surfaces in the kitchen and bathroom, as well as on table tops, window sills and other sensitive surfaces.

Advice: immediately remove stain causing substances. For regular maintenance of floors we recommend Lithofin MN Wash & Clean, for kitchen counter tops Lithofin MN Easy-Clean. Always try the product in an inconspicuous area prior to use. The surface to be treated must be completely dry and clean. Working in small areas (10 to 15m²) apply product generously and evenly until the surface appears wet. Lithofin Stain Stop PLUS is an impregantor plus colour intensifier. It is a ready-to-use special product from the LITHOFIN-Range for ceramics, natural and concrete stone. Floor Levellers & Preparation We offer a range of single & two-part flexible, reinforced and deep fill floor levellers, bulking concrete, primers and vapour suppressants for preparation of your subfloor prior to tiling or laying floor coverings.Active ingredients pose no health concerns once dry (according to tests by LGA Nuremberg). Ensure good ventilation during and after use. Special safety instructions apply when sprayed. Do not use in rooms where food is stored. Please note that the liquid product must penetrate into the stone. Do not allow the product to dry on the surface. Non-absorbent or damp surfaces cannot be impregnated. Glass, ceramics, and surfaces sensitive to solvents (varnishes, wood, etc.) must be protected against Splashes.

A special product from the LITHOFIN-Range for marble, natural and concrete stone (MN). Lithofin MN Stain-Stop contains high quality water and oil resistant components based on alkoxysilanes. A special product from the Lithofin range for marble, natural and engineered stone. Lithofin MN Stain-Stop is a ready-to-use, solvent-based impregnator that contains high quality water and oil resistant components.It is highly suitable for weak to medium absorbent natural stones like granite, gneiss, quartzite, slate and limestone with rough to honed surfaces. It is also suitable for polished stones, indoor and outdoor. Please Note: impregnated surfaces cannot be treated. Marble and limestone remain sensitive to acid. Lithofin Stain Stop PLUS sinks into the stone and reduces the capillary absorbency so water, oil and grease can no longer penetrate the surface. These materials remain on the surface and can be wiped off before they cause stains. In addition to protecting the stone, it darkens it – thereby invigorating the colour structure. Many products on the market have been designed to enhance and "protect" the surfaces of stone, tile, and grout, including sealers, finishes, colour enhancers, and waxes. As the name implies, sealers actually seal the surface tight against chemicals, water, and other contaminants. We are glad you are here and Stone Doctor Australia gives you one of the best sealers from a Lithofin brand; Lithofin MN Stain-Stop. Lithofin MN Stain Stop is a special sealing product from the LITHOFIN-Range for marble, natural and engineered stone (MN). The durability depends on the care products used. Strong degreasing or layer forming products are unsuitable to use. Heavily used surfaces such as kitchen counters should be retreated once a year.