Joined in 2023 
82 
63 About this deal
The most typical issue that arises with this piece of hardware is that it does not function appropriately with Apple Home. The power source 2. The sensor; 3. The connection between the sensor and the door or window. We’ll go over how to troubleshoot each of these components below. While Eve Door & Window are compatible with HomeKit and Thread, it doesn’t work with Alexa or Google Assistant. That means the sensor is pretty much only for Apple users. With the Ecoey door sensor, you can remotely monitor the status of your door or window in real-time by connecting it to the Tuya APP.
HomeKit door and window alarms or sensors provide you with an easy way to monitor the status of your house. With these sensors, you can immediately receive notifications when the status changes, and they work with other HomeKit accessories, allowing powerfulautomation. I completely fail to understand the second bullet point: As already pointed out, there is only one battery, and there is only one way to insert it into the device. Therefore I am not sure what you mean by “make sure they are facing forward, so they’ll charge better”? The battery is not rechargeable, and even if it was, it would not be charged by inserting it into the device, or would it? However, some information here is quite confusing, especially under point 2 (resetting) when it reads: In this article, we will discuss seven issues that are often experienced with the Eve Door & Window Sensor, as well as solutions to these issues. Common Eve Door & Window Sensor Problems Troubleshooting Now, it’s possible that Matter, a promising smart home standard that promises to unite the Alexa, Google Assistant, and HomeKit ecosystems, could change that situation, given that Thread is a pillar of Matter. But Matter has already been delayed once, with the software development kit for the standard now due sometime in 2022 (fingers crossed). SetupFile "/usr/src/homeassistant/homeassistant/components/matter/adapter.py", line 132, in _setup_node_device This is particularly likely if this is your first time setting up any type of home automation device at all. If that doesn’t work, you’ll need to get rid of whatever it is that’s causing the problem, then give it another shot. This door window alarm comes with strong adhesive tape, making it easy to install. The alarm system magnet should be kept within 8mm of the host to ensure correct installation.
In case of a real alarm, Eve Smoke will alert you immediately with a loud alarm (85 dB(A) at a distance of 3 m) and by turning on the emergency light. You will hear a constant sound for a smoke alarm, and a sound/pause every second for a heat alarm. Eve Smoke will continue to alert you until no smoke or heat is detected, or until the alarm is silenced. If configured in the Apple Home App, you will also receive a notification. one needs to insert i.e. the end of a paperclip or similar into a small hole, not sure if that could be called a “button”, but more importantly I had an Eve door & window sensor that behaved erratically: It should pause heating as long as the window is open, but I often found the heating turned on while the window was open. At other times heating suddenly stopped despite the window was closed, etc. I have 4 sensors in other rooms with the same automation which work just fine.File "/usr/src/homeassistant/homeassistant/components/switch/__init__.py", line 83, in async_setup_entry
File "/usr/src/homeassistant/homeassistant/components/matter/__init__.py", line 109, in async_setup_entry Resetting the sensor (and thereby removing it from my homekit config) and re-introducing it to my home is what finally helped me fixing the problem. Eve Thermo is ready to be mounted on your radiator and not calibrated. Proceed to calibrate Eve Thermo by accessing Installation in the Eve Thermo settings of the Eve app. The entire lineup of now 14 Thread-enabled Eve devices will receive free Matter firmware updates over time. Availability of Matter-certified Eve products in retail will start in first quarter of 2023. The Eve app, which has been available exclusively for iOS, will be complemented by a sister version for Android in the same period. Eve is a great example of how smart home device makers can build helpful, innovative Matter devices, that deliver great out of box experiences with Android Fast Pair, and Google Home" said Karen Yao, Director of Product Management for Google Home."As one of our earliest partners, Eve has been instrumental in helping us ensure all the tools in the Google Home Developer Center can help developers deliver those seamless user experiences."When attempting to eliminate the source of the error, exercise extreme caution because certain substances are notoriously difficult to eradicate. After muting an alarm, Eve Smoke will suppress the alert for 15 minutes. If smoke is still detected after 15 minutes, the alarm will sound again. Remove the device from its location near your door or window and replace it where it can sense better light levels. you can’t reset the device without the battery inserted. If you do that without the battery inserted nothing will happen. Finally, when installing batteries into your new Eve Door & Window Sensor make sure they’re facing forward so they’ll charge better”
File "/usr/src/homeassistant/homeassistant/components/binary_sensor/__init__.py", line 169, in async_setup_entry Please unmount Eve Thermo, make sure the valve pin can be pushed in freely, and re-mount Eve Thermo firmly. You can use these risers to boost the height of the Eve Door & Window magnet module (on the far left). Once you have the two Eve Door & Window pieces installed, you can add the accessory to HomeKit by scanning the QR code on the sensor module with your iPhone’s camera; doing so will jump you directly to the Apple Home app, where you can group the sensor with other HomeKit devices in a given room. In my case, I added the sensor to the kitchen. Matter, the new smart home protocol developed by leading smart home platform providers and device manufacturers to enhance interoperability in the smart home, was officially launched now by the Connectivity Standards Alliance. A first-mover on Thread and an early member of the Matter program, Eve participated in the testing and validation of the Matter specification that was released in October.If you have updated your firmware on your sensor, it may take a few hours before it syncs with its hub again and becomes responsive. Press one of the arrow on screen until "E[x]" disappears (the screen will then show "no", which means "mounting" and the valve will move to a correct mounting position) HomeKit door and window sensors are an easy to install way to report on the status of your home. These sensors provide instant notifications when their status changes, and even work with other HomeKit accessories, enabling powerful automations. We love the Eve Door & Window sensor for its fast response times, and modular design, allowing it to function even if your surfaces are not in the best shape.
Great Deal 
New Comment