sourcingmap 29mm Hole Dia Double Port Pipe Clamp Clip Lean Tube Connector

Product Information

Pipes made from different materials will react very differently in certain scenarios. For example, there are many different types of plastic pipe (PE, PVC, PA, PP etc). Each has a different temperature resistance, and different resistance levels to chemicals such as oils, greases, acids, chlorine etc. This can affect what type of clamp should be used. For example, plastic pipes should usually be secured with a lined metal clamp or plastic clamp. An unlined metal clamp can lead to corrosion if used on a plastic pipe. The size of the pipe will influence the type of clamp you need, since all clamps will only be available in certain minimum and maximum diameters. For example, single screw clamps often have a more limited size range as they have to hinge open on one side, so are suited to smaller pipes. Although we specialise in manufacturing stainless steel aluminium and copper pipe clamps. BPC Engineering offer a subcontract presswork service for small batch production. Small parts press work drilling tapping and assembly. We can work with client press tooling or we can design and build tooling to your specifications to produce the components you require. We have a upto date workshop fully equipped with tooling and 8 – 10 tonne pressure presses. You can view our products in the BPC SHOP. Although we specialise in pipe clamp manufacturing, BPC Engineering offer a subcontract presswork service for small batch production. Small parts press work drilling tapping and assembly. We can work with client press tooling or we can design and build tooling to your specifications to produce the components you require. We have a upto date workshop fully equipped with tooling and 8 – 10 tonne pressure presses. You can view our products in the BPC SHOP.

Materials are 316 stainless steel and aluminium. Products range from single port and double port clamps. We also manufacture multi port pipe clamps. All of our pipe clamps include stainless steel fixings. DN Size Pipe Clamps. Before you can select the right clamps to deal with thermal expansion, you first need to calculate the level of thermal expansion on the pipework.Temperature variations can cause pipes to expand and contract. If the correct fixings and clamps are not used to take into account the pipe movement due to temperature changes, the installation could fail and cause damage to the building. Double pipe clamps manufactured from 316L grade stainless steel, aluminium, brass and copper. Pipe clamp manufacturers BPC Engineering offer a selection of quality British made two port pipe/tube clamps. Double Port Pipe Clamps The pipe clamps we manufacture have been cold pressed. This gives the advantage over hot pressed components, as the metal does not lose its strength when cold pressed. These clamps are extremely strong and with the added bonus of being 316L stainless steel (corrosion resistant) makes these pipe clamps the perfect choice for your installation. Full saddle - These types of pipe clamps are secured by two screws, one either side of the semi-circular bulge where the pipe sits.

We go above and beyond when testing our pipe fixings. Not only do we test to RAL approved standards, in-house we test our clamps to destruction, so we know exactly how good they are! Corrosive environments are graded from C1 (low levels of corrosion in the environment) to C5 (highest levels of corrosion expected). Walraven manufacture pipe clamps and fixings that are suitable for use in C1-C4 environments. Saddle clamps work by fixing over the top of half of the pipe, whilst the other half sits on a flat surface.Traditional clamps include split bands, U Bolts and Saddle Clamps, most commonly used to hold steel or copper pipes. They have no internal lining so are best suited to pipes where there are no additional variables to be considered such as temperature or noise insulation. Take a look at our blog which analyses traditional pipe clamps versus heavy duty pipe clamps, to see which is best.

Pipe hangers or U Bolts allow the pipe to sit into the bottom section of the clamp. The hanger is typically fixed at the top to a piece of strut. Pipe clamps are a small circular or semi-circular mechanism that is designed to hold and support suspended pipes either vertically or horizontally. Available in a range of types outlined below, pipe clamps are a cost effective and easy way of fixing pipes to your desired surface whilst still allowing for some necessary movement and expansion of the pipes. Some construction projects can have special requirements such as noise insulation or fast installation needs. In these cases, there are specialist clamps that can be used. At Walraven, we have a huge range of adjustable pipe clamps that fit 99% of known pipe sizes, including clamps suitable to install over insulation. The smallest clamp in our range is 12mm, the largest is 1200mm. Even if your pipe is outside of these sizes we can manufacture custom pipe clamps. Get in touch with us to see how we can help your next pipe clamps project.All of our pipe clamps are made from non-ferrous metals. Stainless steel is ideal for use in areas where corrosion is high. Sizes range from 25mm diameter to 48mm. We can adjust the spacing distancing of the clamps to suit your needs. Pipe Alignment Clamps Offset Pipe Clamps Having spent time carefully choosing your cast iron radiator and matching valves it is important to ensure the finishing touches are in place. The processing of fire-proof clamp body materials, tested and approved according to several international fire-protection standards (such as BS 6853, EN 45545-2, UL 94) is only one of the many particular strengths of STAUFF It is a well known fact that stainless steel can withstand extreme heat, and with the added bonus of being corrosion resistant makes this type of pipe clamp very favourable. These stainless steel pipe clamps are popular with marine installations and suitable for salt water use. They are corrosion resistant and they can withstand extreme heat. The use of non-welded pipe clamps are favourable due to their reliability and strength. Welded components can malfunction under certain conditions. NO welding is involved in the manufacturing of any of our products.

The environment into which your pipe clamp will be installed can affect the type of clamp you should use. For example, if the installation is external and exposed to the weather, this is an important consideration and will more than likely require a pipe clamp with a special coating for corrosion resistance. Many of our standard pipe fixings are available with our special corrosion resistant coating Walraven BIS Ultraprotect for outdoor use. Material - Whilst pipe clamps are most commonly manufactured from steel, they can also be constructed from plastics such as polypropylene. Such plastics are just as resilient as steel and have the added bonus of minimising damage such as scratches to your pipes. Surface treatment - Pipe clamps are often finished with a zinc plating or galvanised to offer added protection against wear and tear. It's worth noting whether a plain, untreated product would suffice or whether a more hardy, coated product is required for your application. Compatible pipe diameter - It's crucial that you accurately measure the pipe that you intend to attach to your desired surface. This will ensure that the pipe clamp can hold the pipe in place effectively.Larger pipes will often need two screw clamps, traditional fixings or heavy duty clamps which are manufactured to suit larger sizes and heavier loads. Cable ladder cable clamps heavy duty. For heavy duty cable clamping . These cable clamps are available in 316L stainless steel and aluminium. The fixings are M8 bolts with nyloc nuts making this clamp shake proof. Half saddle - Unlike full saddle clamps, these possess only one screw hole to secure the pipe in the clamp. Double Pipe Clamp Stainless Steel 42mm Diameter Ports / 25mm X 3mm. Ideal for pipes and tubes with a 42mm outside diameter.