Ronseal CRDODO500 500 ml Colron Refined Danish Jac Oil - Dark Oak

Product Information

The key thing to consider here, is how the price of Colron Refined Jacobean dark oak Danish oil 0.5L compares to others but taking into account the quality and features of Colron Refined Jacobean dark oak Danish oil 0.5L over the other options. However, we then like to go a little deeper to explore more detail about the product by looking at products in the same category as Colron Refined Jacobean dark oak Danish oil 0.5L. That then tells us that there are 4480 products in the Painting & Decorating category at B & Q. After another hour we wiped the board again, although there were no obvious signs of surface oil at this stage and the board was dry to the touch, with a pleasant low sheen finish. Before and after applying Danish Oil ‘wet on wet’ Apply the Danish Oil liberally with a clean, lint-free cloth or natural bristle brush, and wipe off any surplus oil after a few minutes

The performance of Danish Oil will continue to improve naturally for a week or two after application. We recommend that wood should not be subject to heavy use, and any water or other spills should be wiped off immediately during this time.The board was left at room temperature for 48 hours before it was used to allow the Danish oil to cure.

Any ‘nibs’ or dust on the surface of the wood during oiling cannot be removed with this method of application until the wood has been left to dry for at least 24 hours. The particles should then be removed with a very fine grade wire wool (oooo grade). Barrettine Danish Oil should be applied at a room temperature of between 15°C - 25°C Do not apply below 5°C. Stir / shake well before use. For a superior smooth danish oil finish, the final coat may be applied using a plastic scouring pad, rubbing in the direction of the grain and wiping away any surplus with a soft, lint-free clothAs with any coating, surface preparation is extremely important in getting a satisfactory end result. For a smooth, silky finish, lightly sand the danish oil between coats with very fine sandpaper or wire wool After another 20 minutes we returned and removed all the remaining Danish Oil from the surface with a clean rag: