Joined in 2023 
82 
63 About this deal
The monitor is built with a TN panel, so the bad news is that this does provide a more limited viewing range and the colours aren’t as vivid as they could be with an IPS based monitor. But this is the case with all TN screens and besides, this is a gaming monitor. The real benefit of this screen comes when you fire up a fast paced action game that needs decent hardware to keep up. But that said, for a TN based monitor, this is one of the best you will find. And thankfully, if you think putting together new kit is a pain, this BenQ is easy enough to assemble. No nuts and bolts, just a few pieces to slot together and Bob’s your uncle. You’ll be up and gaming in no time at all. It also comes with cables which is always appreciated (VGA cable, DVI cable, power). The operating humidity shows the acceptable level of humidity, in which the display will function flawlessly. It sets a lower and an upper humidity level for safe operation and is measured in percentage. Information about whether there is a possibility for wall mounting according to the VESA Mounting Interface Standard (MIS).
Note: 144 hz with toggled AMA premium (Yes, premium has toggles too but the ama decrease compared to "default" premium is less) actually looks ok. 144 hz with toggled AMA premium looks like 100 hz with default AMA high. sudo i2cdump -r 0-127 1 0x50 <--- get EDID (0x50) from bus 1. You are looking for an EDID dump that shows the monitor name in it. You may have to change the 1 to a 0 ( 0 0x50 insteada of 1 0x50), or you may have to change 0x50 to 0x49 (probably not, though; most video hardware will always be on 0x50). Once you find the dump that says "XL2411Z" then you're good to go. In some cases your monitor may be on bus 0, thus the change from a 1 to a 0. On my R9 290x video card, on the DVI port, this was bus 5. So the command I had to use was "sudo i2cdump -r 0-127 5 0x50" There's no automated way of doing this, though, due to having to rename and copy the firmware files and having to identify what bus port it's connected to.Information about the maximum vertical viewing angle, within which the image on the screen is of acceptable quality.
The maximum number of colors, which the display is able to reproduce, depends on the type of the panel in use and color enhancing technologies like FRC. I found out that you can copy and paste the exact commands from the text file, directly into the Ubuntu command line console! Also if it changed anything, I'm using a tri-monitor setup, main monitor (the one I'm having the problem with) HDMI, one monitor DVI, and one monitor going through a display port to HDMI adapter cause the monitor doesn't have a display port, don't know if this changes anything but I figured I might as well include it. massively improves overdrive. Inverse ghosting reduced from excessive to very low. (60hz benefits hugely from this toggle. Works with default contrast of 43). hz: turns inverse ghosting into normal ghosting. existing normal ghosting becomes more intense by the same degree. Reducing contrast to 0/10 has a massive improvement in overdrive quality compared to the default AMA high with 43 contrast (without toggle). At contrast 10, there is no inverse ghosting anywhere and only very minor added normal ghosting (which was intense at 43 contrast).
Throw Your Computer In The Ocean.
The storage humidity shows the lower and upper humidity limit, which ensures safe storage of the display. Storing it outside these limits might damage the display. Take advantage of ultra low 0.001-frame input lag to embrace the smoothest gaming experience! To give gamers precious milliseconds during the game, all action will be rendered smoothly without ghosting, and mouse motion will be synchronized with no latency. Best Combat Positioning The pixel pitch shows the distance from the centers of two neighboring pixels. In displays, which have a native resolution (the TFT ones, for example), the pixel pitch depends on the resolution and the size of the screen.
Great Deal 
New Comment