Joined in 2023 
82 
63 About this deal
Some USB-C hubs go further by incorporating USB-PD passthrough. Here the idea isn’t so much to power the connected devices as to power the laptop the hub connects to, so that you just connect the laptop to the hub, and it charges as you use it without the charger taking up the spare USB-C port. The key thing here is how much power the hub can supply. Most will deliver 80W or more when used with a 100W charger, which should more than cover any laptop. However, with some you’re looking at 50W or less, which might mean missing out on fast-charging modes on some of those laptops that support them. Similar to the Sabrent HB-U3CR, the Atolla delivered 1.2 amps at 4.8 volts on our power test and it charged our phone at 4.78 volts and 1.35 watts. The Atolla hub also offered similar performance to other hubs; we detected no slowdowns when copying files with our test SSD. At 4.8 volts, which is around the minimum voltage most USB devices will tolerate, we got 1.25 and 1.32 amps from the charging and data ports, respectively. When I plugged my Android phone in to charge, a real-world situation because a device will negotiate the best combination of volts and amps, the charging ports sent 4.78 volts at 1.35 amps while the data ports gave the same amount of volts, but just 0.35 amps. To make a long story short, you'll get 6.4 watts from the charging ports, which is decent but not the 15-watts that fast phone chargers provide. All three charging ports should be able to deliver this at once. If you have a recent-gen iPad with a USB-C connector, you may find yourself wishing you could connect a USB Type-A device, headphones or even an external display. Anker’s 541 USB-C Hub for iPads has you covered with a unique design that’s meant to snap right into the side of your tablet or even a USB-C laptop. There’s no wire as the USB-C plug and a slight, protruding chin hold the entire metal hub in place.
If you're using an external storage device – perhaps an NVMe drive you've put in one of the best SSD enclosures– you’d benefit a great deal from using a hub that supports 10 Gbps connections – alternatively known as USB 3.1 Gen 2 or USB 3.2 Gen 2. Unfortunately, very few USB hubs actually support these higher speeds and even fewer still support the 10 Gbps speed when it comes from a Type-A, rather than a Type-C, port. Powered or not? Some USB hubs come with their own AC adapters so that they can provide more power than your computer delivers from one of its ports. Bus power from your computer can be pretty low, not enough to juice several power-hungry peripherals at once or to charge devices at a reasonable rate. By definition, a USB hub that needs its own plug isn’t very portable. Not every USB Hub is one of the best USB hubs you can buy. We tested a number of other models that are worth considering, but not necessarily at the head of the class. The hub supports fast data transfers up to 5Gbps for expanding USB ports or connecting multiple devices. It also has USB on the go and simultaneous transfers across all ports. It’s plug-and-play, and no extra drivers are needed for PC, Mac, or select versions of Linux (2.6.14 or later). An integrated safety chip offers overcurrent, overcharge, overvoltage, overheat, and short-circuit protection for both the hub and any connected devices.If the number of ports is your biggest concern, the Acasis 16-port USB hub is one of the biggest. All 16 ports are USB 3.0, and they all support fast charging up to 2.1A and data transfers up to 5Gbps. There are no compromises, no ports left behind—just full functionality across the entire unit. There are also seven- and ten-port variants if you want something slightly smaller. Ethernet is easier, as it’s hard to find a hub that doesn’t support Gigabit Ethernet speeds. That said, a small number now support the faster 2.5 Gigabit (2.5GbE) standard, which isn’t a priority for most home networks, but a plus for advanced users or just for future proofing.
It’s not exactly portable, but it’s certainly a good option for anyone who needs a massive boost in available USB ports. The option to fast-charge four mobile devices at once is ultra-convenient. Moreover, it’s plug-and-play compatible with PC, Mac, and Linux systems. Anyone who works with microcontrollers such as the Raspberry Pi Pico or any Arduino board knows that most of these devices don't have on / off switches or even reset buttons. So, if you change code and need to restart them or you just want to power them off, you often need to yank the plug in and out, a huge hassle that could damage your gear. But with the Sabrent HB-B7C3, you can just toggle power on whatever port your microcontroller is plugged into.Why you can trust Tom's Hardware Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test. I have been using the Sabrent HB-BUP7, the nearly-identical 7-port sibling to the HB-B7C3, as my daily driver for more than a year, and having these buttons is a real game changer. Changing default audio devices in Windows is a royal pain, requiring one to go into the control panel to, for example, make sound come out of your headset instead of your speakers. But with the power switches, I just turn off my USB speaker and turn on the wireless headphone dongle, or vice versa.
Great Deal 
New Comment