Joined in 2023 
82 
63 About this deal
Enable the router's Hardware Accelerator. To do that, go to [Hardware Acceleration] and enable it for TCP and UDP to accelerate all sessions.
DrayTek VigorSwitch switches can be provisioned and managed through the router with DrayTek’s Central Switch Management system, which allows you to: Building on the success of the Vigor 2926 and 2925 series, DrayTek UK/IRE is excited to offer new routers for small offices and demanding home offices,” stated Julian Hubble, DrayTek Sales Director. “ The Vigor 2927 delivers the reliability and flexibility you expect in a DrayTek product, all with a total NAT throughput of 1.8 Gbps or 950Mbps per-WAN.” For most Fibre networks in the UK & Ireland, no VLAN tag is required for Internet connecitivity on the Vigor 2927 router. For example with the Openreach Fibre network. If VLAN tags are used by the ISP, they are usually handled automatically by the ISP supplied ONT. Nearby Mesh Nodes can connect to an Ethernet Mesh Node instead of another Wireless Node to reduce the 'hops' between Nodes.
DrayTek SSL VPN for Dial-In Teleworkers & LAN to LAN
Log into the router's web interface and upon logging in, the [Dashboard] will be displayed, with the current LAN & WAN status. With 5 dedicated LAN ports and one flexible LAN/WAN port, the Vigor 2927Lac can connect up to 6 devices directly with a single Ethernet WAN configuration, or 5 devices with a dual Ethernet WAN configuration. Vigor2927 Series provides reliable broadband connectivity with the multi-WAN accesses. The two Gigabit Ethernet WAN ports can be operated in failover or load balancing mode to ensure a steady Internet connection. The two USB ports can work with 3G/4G/LTE USB modem to add additional wireless Internet access. Make sure the WAN is enabled and is set to Always On rather than in Failover mode, so that the WAN interface will be utilised.
A few ISPs / networks do require a tag however, CityFibre for example needs tag 911 set on the router. The Vigor 2927Lac provides up to 6 Gigabit LAN ports for wired links to Computers, Servers and Network Attached Storage. DrayTek Vigor routers and access points are primarily configured and monitored through the Web User Interface ( WUI) but can also be monitored or configured through the router's Command Line Interface ( CLI). The router will accept commands that follow valid syntax (type " ?" in the CLI for examples of these) and allows the router to output information that may be required for diagnostics. The Vigor 2927 Router (along with most other DrayTek routers, access points and switches) can be centrally managed by DrayTek's VigorACS central management platform. This scalable solution provides visibility, control and reporting of your entire DrayTek product estate, ideal for dealers/SIs managing customers' devices or any user who wants to know what's going on with their devices. VigorACS also provides features like automated/bulk firmware updates, VPN management and alarms for connectivity or other issues. Robust & Comprehensive IPv4 / IPv6 Firewall
Web Content Filtering with DNS Filter
The router has full support for 802.1Q VLAN tagging, so that these subnets can be passed to other devices that support VLAN tags, such as the DrayTek VigorSwitch G1080 8-port switch (sold separately, see accessories tab), for additional network ports. The Wireless LAN also links to these VLANs, making the same Guest & Private networks possible simply using different wireless SSIDs. Or connect up a DrayTek VigorAP wireless access point, such as the VigorAP 903 (sold separately, see accessories tab) to do the same, spanning the router's own wireless and any connected wireless APs. Designed for Central Management In any problem state, it's usually best to use a wired (RJ45/Ethernet) connection rather than wireless. If you cannot access the web interface of your Vigor router, here are some possible causes: For even greater resilience, the Vigor 2927 Broadband Router provides High Availability (HA), with both a primary and secondary router able to provide connectivity to your network and subnets. In the event of the primary unit failing, the secondary unit will take its place on the network, automatically switching over to resume internet, routing and VPN connectivity with no intervention required. This can remove the possibility of a single point of failure within your routers. With Config Sync, the two routers are managed as a single unit, so that any changes made to the primary router will automatically propagate to the secondary router, ensuring it’s ready to take over at any time. Manage Guest WiFi with Hotspot Web Portal Please note that in this example with the Vigor 2927, WAN1 is the first available Ethernet WAN port, But on DSL/Ethernet routers like the Vigor 2866, WAN2 would be used instead. The configuration is otherwise the same.
It supports all common industry standard VPN protocols, for it to connect to VPN services, link remote offices and handle connections from all types of VPN clients. Supporting IPsec IKEv1 & IKEv2 protocols with EAP and XAuth authentication, DrayTek's SSL VPN and L2TP for both LAN to LAN and Dial-In teleworker VPNs. In addition, teleworkers can connect to the router with OpenVPN.
Key Features
DrayTek Vigor routers from the Vigor 2860 / 2925 and later support the Web Console feature, which allows command line interface via the router's web interface, using the same encryption that the web interface is accessed with (HTTPS is recommended). The output of some log commands, typically ones that are more verbose, such as "log -wt" is not supported through this interface. The Vigor 2927 is an ideal VPN router, with 300 Mbps standard IPsec VPN throughput and up to 50 concurrently active VPN tunnels. With Multiple LAN subnets and VLANs, the Vigor 2927Lac can manage up to 8 separate networks. For instance, an internal network with a separate network for Guests to use, completely separate from the private network. Each network with its own Content Filtering, Firewall, Quality of Service and Route Policy applied.
Great Deal 
New Comment