Everbuild 507 Rendagrip | Quick Drying, Extra Grip Render Bonding Agent, Suitable for Concrete, Brickwork and Blockwork - 10 Litre

Product Information

You may have painted your home exterior with the very best of intentions, but as that painted finish starts to deteriorate, issues will inevitably arise over time. The most crucial part of rendering is making sure you get the mix right. This is essential! It’s never hard to achieve but ratios are critical and If you get the mix’s wrong then you risk ruining your wall. This is a very simple process but critical all the same. When you’ve applied your first coat of render you need to scratch it with a tool called a Plastering Scratcher. This is very simple and extremely easy. If you want to find out more about plastering visit this link and discover the ultimate guide to plastering a wall. They offer an additional coating of insulation that will keep your home warmer, and lower your energy costs.

The finish comes in a number of colours and attractive finishes that can help you to set your home apart from others on the street.

Exterior Pregrit

Coverage: Approximately 3 meters square per litre depending on porosity and how rough the substrate. Spray foam is an established product used in the UK for over 30 years and internationally for even longer with few problems.

The way it works is that you scrape the excess render off the wall using your straight edge. This takes the render that isn’t needed and makes the remaining render nice and flat. It’s quite a skill but with time you can get your walls perfectly flat using this process.Follow this whole process until the wall in floated. Then we are ready for the final stage of rendering… Finishing The Render – Sponging! However, you need to make sure that you’re applying enough pressure to the render as you spread it. You can’t just trowel it onto the wall. you need to really push the render into the surface with a firm amount of pressure. This provides a strong bond making your render tough and solid. These are the tools you will need! You could use more but this is the essential list of tools and you can’t miss any of these. You’ll need them all. Next up is making sure you have the correct mix! Mixing Your Render So here’s what you’ll learn in this article but first let’s discuss the tools you’ll need to start rendering. Tools You’ll Need For Rendering It’s very easy but I would recommend to render a section at a time and scratch it as you go. If you wait too long then the render will dry and it will be tougher to get a decent key into your scratch coat.