Silverline Pipe Bender Guide 15mm (MS124/15)

Product Information

Cold bending, including hydraulic pipe bender, electric pipe bender and three roll bending machine; However, when using “one die for multiple pipes,” pipes with the same diameter should use the same bending radius, and the same modules should be used for bending pipes with different shapes. This helps to reduce the number of modules needed. Bend Pipe Mandrel and Its Position Each file can store 16 bending angles, and 16 sets of files can be stored in memory. The slow-speed positioning function and stable bending angle ensure a repetition accuracy of ±0.1°. During the bending test, it is important to ensure that the advance speed of the auxiliary pushing is synchronized with the bending speed.

Spare formers and guides are essential accessories for pipe benders, as they help to ensure accurate and consistent bends in pipes. Formers are shaped pieces of metal or plastic that are placed inside the pipe to help guide it as it is being bent. Guides are used to hold the pipe in place and prevent it from slipping or moving during the bending process. When the proximity switch is not sensed, the display screen will show the corresponding cause of the fault. Use the displayed fault information to locate the problem for maintenance and troubleshooting. Second, it is necessary to determine the bending parameters of the largest pipe fitting that falls within the scope of bending, including: In the process of pipe bender mold manufacturing, NC pipe bender mold is used in almost all links, such as forming mold, hot mold, cold mold, plastic mold, etc.Add No. 20 mechanical oil to the revolving body and gearbox up to the centerline of the oil level indicator. Before starting the pipe bender each time, lubricating oil should be added regularly at fixed points and quantitatively according to the requirements of the lubrication chart. The position of the oil cooler relative to the machine tool should be determined according to the actual operating position. According to the method of pipe bending, it can be divided into push bending, roll bending, press bending, and circle bending. Of these, circle bending is relatively easy to automate, so currently, bending machines are mostly designed for this method. The bending process principle is illustrated in a diagram. The Pipe Bender uses a touchscreen to add a numerical control module and features a dialogue-type operation for easy program setting. Its structure is stable and not easily deformed.

The position of the mandrel in the pipe forming process has a certain influence. In theory, the mandrel tangent should be at the same level as the pipe bending die tangent. However, a large number of experiments have shown that advancing the mandrel 1-2 mm is better, and the bending quality is ideal at this point. Drive the collet clamping cylinder to observe the movement of its sliding sleeve and the reliability of the clamping. First, the pipe diameter range of the elbow must be determined according to the actual production situation. In addition, automobile, adjustment train, general machinery manufacturing, and furniture manufacturing have become the main users of CNC pipe bender mold industry.

An arc greater than 180° makes it impossible for the pipe bender to discharge. Bending Speed of Pipe Bending Machine

To install the mandrel bead (7), screw the mandrel rod (11) into the mandrel rod (15), and connect the mandrel to the cross joint of the mandrel cylinder. Large circular arcs not only increase the workload but also are limited by the size of the tube bender.After use, cut off the power supply and properly clean and lubricate the machine. Bend Pipe Type Regularization