Vitrex 10 2280 Grout Finisher, Blue

Product Information

Natural stone and some porcelain tiles may need to be sealed after application. Follow the manufacturer’s recommendations and seal before and after grouting. This helps protect the tiles from staining. Use a sealer rather than grout release if you want to enhance the color of stone or leave a “wet” looking finish. You may have to apply another coat of sealer after grouting for maximum protection and to enhance the color of the stone. Required Tools for this Project

Apply a thin coat of sealer to porous stone. Follow the application instructions on the label. Wipe up excess sealer with a cloth to avoid puddles. Then let the sealer dry before you grout.

Keeping your bathroom tiles clean is a relatively easy job but when the grout starts to become dirty or discoloured, it can ruin the appearance of your bathroom. If you haven’t tried already, there are many high quality grout cleaners you can use but if they weren’t up for the job, the best way to clean the grout upon your tiles is to remove and replace it. Tiles are usually given batch numbers, so to ensure proper colour matching try to buy all your required tiles from the same batch. You might want a simple refresh or you are looking to change the colour of the grout and the current grout is in decent condition you don’t need to remove all of it. Just make sure that you remove at least 2mm so that the new grout can cover the old. How often should grout be replaced?

Tiles are durable and easy to clean, meaning that in the long term they’re very cost effective to install. Other than regular cleaning and occasional replacement of sealant or grouting, bathroom tiles are also low maintenance. You can use one of the best grout cleaners to easily do this. Alternatively, you can use a 50/50 bleach and water mix and scrub with a toothbrush. Or, for a harsher clean, you can try a bicarbonate of soda and distilled white vinegar mix. Make sure you reseal the grout afterwards to prevent further discolouration.But if you are using 2mm or 3mm tile spacers and don't have a grouting tool to hand you can use the top of a round pencil to get the uniform finish. Leave in water to moisten and dip each time you use the pencil. Can I Apply GroutWithoutA Float?

Get your grout removal tool and start in one corner, work in one metre square sections. Hold the tool and use your other hand to steady the tool-holding hand. Apply pressure and drag the removal tool along the grout line. Repeat until you have removed the grout and move onto the next section. In this guide, we’ll take you through the whole process of fitting wall tiles, from planning, to cutting and laying tiles, and finishing off with sealant and grouting.Remove as much grout as possible off the tiles and get a damp sponge and wipe down the area you have just grouted. Wring out the sponge and repeat. Now run a grout finishing tool along the grout to get a smooth even finish. Alternatively use the end of a round pencil. Alternatively, you can use an electric grout removal tool. This makes the process less labour intensive, but you will have to pay more for the tool. When tiling onto walls you need to consider the combined weight of the tiles and adhesive. Different wall surfaces will be able to safely support different weights. Refer to the manufacturer's instructions whilst you’re planning so you get the right tiles. Our handy guide below summarises the maximum weights different walls can take:

To help you successful remove grout from tiles and replace it with new grout, we have created the below guide that covers each step of the process. What You’ll Need Thorough preparation is crucial if you want your tiles to be laid properly and last a long time. Before you start laying tiles your wall needs to be absolutely clean, dry and free of dust and grease. Yes, you can. But, you’ll need to remove the existing grout, or at the very least take a few millimetres off of the top of the surface of the old grout. Then you will need to clean to remove dust and debris before you start adding the new grout. If you have natural stone tiles like slate you will need to seal your tiles too and can use an all-in-one tile and grout sealant. A grouting float is a good choice for those new to tiling and grouting. It helps make sure that the grout gets spread around evenly and worked into all the joints.Installing tiling in your kitchen or bathroom is a wonderful way to make a statement which reflects your individual tastes. Although tiling has traditionally been thought of as a complex DIY task, it’s perfectly possible to achieve a professional finish with thorough planning and by carefully working your way through the steps we provide in this guide. Yes you can, but its not recommended as a wholesale replacement. Grout is developed to provide a solid, hard wearing finish in areas that have no – or very minimal – movement, such as walls and floors. On average grout should last at least five years if looked after properly i.e. cleaned and resealed (where necessary). But it's more a judgement call on the state of the grout that will decide when it should be replaced.