Joined in 2023 
82 
63 About this deal
Glue syringes consist of a cylindrical plastic case, a plastic plunger (with or without rubber stopper) and a cannula (hollow needle) which is attached to the tip of the case. The hollow needle makes it possible to inject or extract liquids without having to pull the wallpaper off first. The plunger is used to draw the adhesive into the syringe, and to eject/inject it. Do you have Loose/hollow tiles and Thin/Narrow grout lines? The Fix-A-Floor Precision Micro syringe adapter kits allow you to reach through those thin/narrow grout line areas, Can also be used on wooden flooring to repair creaky floorboards.
Araldite® Rapid is a strong 2-component epoxy with fast setting. Parts repositionable for 4 minutes. High temperature resistance (-30°C to 80°C). Oil, chemical and impact resistant. Another reason for lumps under the wallpaper is a visible excess of wallpapering paste. If the paste cannot be smoothed out, the glue syringe can do wonders. The hollow needle pierces the blister and the glue is extracted into the barrel by pulling the plunger. Any remnants of the adhesive are carefully smoothed towards the puncture mark with a clean, lint-free cloth or a piece of kitchen paper. Models of glue syringes The Fix-A-Floor Micro Precision Applicator kit is perfect for use with low-viscosity Adhesives to apply to those hard-to-reach areas or in thin/narrow grout line areas.
Araldite Rapid Syringe 24ml
It has a strong, long-lasting, solvent-free adhesive which is water-resistant and can be painted or sanded. Features & Benefits: Glue syringes are suitable for any wallpaper adhesive or paste. Although similar to disposable medical syringes, the glue variety can be used repeatedly, just as long as all components are cleaned and dried thoroughly after use. Can I use any disposable syringe for wallpapering purposes?
Includes a 1.8mm 14 gauge stainless steel tip syringe for precise applications (Wood, Laminate, Vinyl Plank & LVT) The NEW innovative micro precision injector kit was designed specifically to apply Fix-A-Floor under your creaky, loose and hollow floors.Most of us wouldn't like to live with this accidental "bubble pattern" in our lovely new wallpaper as it impairs the visual effect. A cross cut is often the best way to deal with large air bubbles. Depending on the carrier material, the wallpapering paste is spread with a small brush onto the underside of the cut wallpaper (paper carrier material, please observe the instructions Re: soaking time), or directly onto the wall (non-woven/fleece carrier material). The cut is then re-sealed. The cleanest (and absolutely invisible) method for smaller air bubbles is injecting glue under the wallpaper with the glue syringe.
Great Deal 
New Comment