DWE7485 Compact Table Saw 1850W 240V

Product Information

If you are looking for a lightweight saw that does not take up room, this is the product for you. It offers 15 amps and 5,800 RPMs in an 8.25-inch blade. The saw is easy to use and offers an array of dust collection and safety features for beginner and intermediate woodworkers alike. You can get 24.5-inches of rip capacity to the right of the blade. That can handle four by eight sheets of plywood or OSB. Cabinetry could challenge that capacity if it is large enough in size.

The main downside to using a blade of this size is that it just can’t cut as deeply as a larger blade, your end up with a depth of cut of 2 9/16-inches at 90 degrees and 1 3/4 at 45-degrees. But this is still fine for those of you who need to do a 45-degree bevel cut in two-by-four framing lumber. Stationary saws on the other hand are permanent installations. They are heavy and cannot be moved around. They offer a number of features and their usage can be expanded by adding accessories for different applications. These saws are expensive and use up a lot of space. They are further classified into contractor, hybrid, and cabinet models depending on their size, tool compatibility, and output power Safety features typically begin with the blade guard; this one is clear, so you can easily see the contract between the blade and what’s currently being cut. Though you will need to clean it regularly to keep the view unobstructed. The first time I switched on this motor, I was amazed by its power and smoothness. It took absolutely no time to reach its no-load speed, proving to me just how efficient the design of the motor was.

This was further helped by the fact that the tool weighs just 54 lbs. It was hard to believe that a table saw could weigh so less initially. Trust me though, the DWE7485 is actually this light and portable, even with your tools and accessories safely stowed away in the onboard storage. However, if you are looking for something with more features that cabinet makers and professional woodworkers may need, then you may have to look elsewhere. The tabletop is made from lighter compound metals, this is the first tabletop I’ve expedited using these compound metals, but this design element is what helps reduce the overall weight of the table saw. Direct drive systems do not have a belt. In such a system, the blade is connected directly to the motor, resulting in efficient transmission. However, the speed of the blade is limited as a result and are much louder

DEWALT reserves the right to refuse any claim under this guarantee which in the opinion of the authorised repair agent is not due to material or manufacturing defect or in accordance with the stated DEWALT European PT Guarantee terms and conditions. In addition to the product exclusions stated in the DEWALT European PT Guarantee, section 3, the following DEWALT branded products are also excluded: However, there is a minus for both. There is no belt-driven motor, so they generate a lot of noise during operation. You’d better wear hearing protection devices whenever working. Blade

All of this is designed within DEWALT’s Modular Gaurd System. MGS has been an industry standard for a few years now and it allows you to disconnect pieces without having to remove the entire system. This system also allows for tool-free adjustments. The tabletop of the two saws contains 100% stainless aluminum, improving their durability. DeWalt also uses high-quality plastic to reduce breakage.

The two models go with highly visible bevel and miter scales, supporting you in setting the desired angle correctly. However, the metric system of DWE7485 slightly leans to the left side, so it is quite hard to select the angle to a tee.High power motor provides extended durability Ideal for cutting flooring and many other materials to size Stand which is fitted with large heavy-duty wheels It has a dust port that measures 2 1/2-inches. That will fit many shop vacs, and you should be able to source a conversion kit that will fit it if necessary. Keep an eye on the hose as it can interfere with the riving knives if it is pulled too tightly.