INJORA RC Car Axles Set CNC Metal Front and Rear Straight Axle for 1:10 RC Rock Crawler Axial SCX10 D90 RC Car

Product Information

You will need at least an Allen/hex driver and nut drivers. This allows you to easily change wheels and make swift adjustments on your car.

The Losi Night Crawler Kit is a rolling chassis that does not contain any electronics, battery, or charger. For ultimate DIY flexibility, add your own motor, electronic speed control (ESC), servo, and radio system to the chassis. Everything ultra light weight and LOW. I might not do rear steering. But I want a ton of power so probably and 3350kv 10 pole motor and a mamba x. Another important factor to consider is the gear ratio of your axles. The gear ratio determines how much torque your vehicle can generate, which is important for climbing steep inclines and navigating through tough terrain. A higher gear ratio will provide more torque and power, while a lower gear ratio will provide more speed. Suspension Type

WHEELS

You can see in one of the photos all the parts together over the bed. I completely NOT recommend printing various parts at a time, as you can have worse results and more fail possibilities. Specially for the gears, print them one by one and put the seam point near the center, so no start points occur over the tip of teeth. The Complete Guide to Buying RC Vehicle Axles for Kids How to Choose the Right RC Vehicle Axles for Your Needs So while looking for some info for a upcoming build I thought to myself "wouldn't it be nice to have all the axle width info for all the vehicles associated with RC crawling, scalers, Ultra4, bouncers, ETC??" Most if not all of these parts are strictly dimensioned, so It would be better if you print them solid. For that, I'm using 0.4mm line widths and 0.2mm layer heights with hundreds of top/bottoms, so it gets solid. do portals kind of defeat the purpose of building an LCG crawler. IF the goal is to lower the center of gravity, it seems that portal axles are kind of counter productive.

The suspension type of your RC vehicle can also affect the type of axles you should choose. If you have a solid axle suspension, then you'll want to look for axles that can handle the weight and stress of the vehicle. If you have an independent suspension, then you'll want to look for axles that can provide plenty of clearance and flexibility. Brand Matters It features a Molded CNC Machined Face, Perfectly Fit and Finished. Moreover, it is high-strength, lightweight, and highly resistant to corrosion. Finally, it is highly durable, corrosion-resistance, and fatigue-resistance; and comprises easily replaceable parts. The high-quality carbon fiber and delrin materials make these wheels super lightweight, while still providing ample strength to support the weight of the MOA crawler. Have not gotten anything yet. Still trying to decide on the body. Sell some tools and engine parts and start the collection. I have tried to minimize the needed sourced parts as always, and employ the most common and sourceable possible parts. In the rear axle you can use the same CVDs than in the front one or use a 3D printable solution for what would be the Rear Dogbones.Thanks to an included "Adaptor", you can use 102015 CVDs instead of 106015 ones in the medium and long axles, but you won't be able to use 106015 CVDs in the medium or short axles... So I would recommend you to buy 102015 for short and med, and 106015 if you know you want the long axles. Remember you can use 3D printed transmission in the rear axle if you want to go cheaper.

Let's take a look at the design considerations and the important components to look for when shopping for a high-end RC Crawler. Designed to be an out of box competition crawler tire, the Bully 2.2 is created with the help of the RC4WD Crawler Team with full testing completed in multiple conditions and terrains. The MOA chassis is machined with carbon fiber material. This is a new high-quality material RC4WD uses to make the MOA lighter to bring you the best options for your crawling style. Another advantage of quality tools is that they will serve you for a long time, and those that wear fast only need to swap the tips.However, if necessary, the user can replace the Losi motor with another authentic Losi motor from the manufacturer. One of the most important considerations when choosing RC vehicle axles is the material they're made from. Generally, you'll want to look for axles made from durable materials like steel, aluminum or titanium. These materials are strong enough to withstand the wear and tear of off-road driving, and they can also help improve your vehicle's overall performance. Gear Ratio

Thanks to an included "Adaptor", you can use 102015 CVDs instead of 106015 ones in the medium and long axles, but you won't be able to use 106015 CVDs in the medium or short axles... So I would recommend you to buy 102015 for short and med, and 106015 if you know you want the long axles. Remember you can use 3D printed transmission in the rear axle if you want to go cheaper. I have also tested with Vandal CVDs, and it should be compatible with another very simple adaptor with HSP 122015 and 166015 CVDs. The Night Crawler features a scale body with an Exoskeleton cage that protects it from the weather while maintaining scale accuracy and performance. I also have a set of Enduro axles but they had terrible torque twist. I know have them on a comp rig with 30% OD, class 2. The toque twist is gone. Not sure if it is the OD or the chassis. I suspect both. I think the low pinion on the Enduro makes the drive line angle more of an issue? With the additional mounting point on the comp chassis it was easier to play around more with the drive line angles. To identify your axle, look for a stamped number on the axle itself. This number can provide information about the axle, such as the year of manufacture and the model vehicle it originally came from. This information is particularly useful when seeking replacement axleshafts and brake parts for swapped-in axles. 3. Why is live axle better? The use of a 4-link suspension system helps to reduce rear axle swing. A flawless bend allows for smooth operation and accurate handling throughout the suspension cycle.

Specially for the gears, you will need a very high inter-layer adhesion, so probably warm up 5 or 10ºC your PLA for the best adhesion and adapt the inner walls width to perfectly fill all the inside of the part. Front Steering Hubs will need some support for the center surface, but not for the arm or other parts.