Joined in 2023 
82 
63 About this deal
Add Component B to Component A and mix thoroughly by stirring, taking care to entrap as little air in the adhesive as possible, after mixing cover the vessel and leave to stand for approx. 5 minutes to allow the larger bubbles to rise to the surface. Cover the container and allow the mixed adhesive to stand for 5 minutes to allow the larger air bubbles to
EVO-Stik TENSOL 70 is intended for cementing acrylic sheet to itself, but it will bond acrylic sheet to other materials such as wood. Applications include sign making, model making, structural engineering and acrylic sheet repair. Unsupported gaps of up to 1mm can be produced. EVO-Stik TENSOL 70 is not recommended for structural applications on aircraft. Mix Ratio (By Weight): Thoroughly mix the adhesive by stirring, taking care to entrap as little air in the adhesive as possible. The only be done at least one hour after the adhesive has set. Non-thermoformed components can be heated Joints will be set sufficiently to be handled after 3 hours but must not be machined for at least 24 hoursIt is versatile, single part cement suitable for general fabrication work which does not need high bond strength, (usually for internal applications). ANGLOSOL CEMENT 1200 is suitable for joining items made from ‘Diakon’ acrylic polymers as well as cast acrylic (Perspex). The bonds obtained using Tensol 70 are of approximately the same strength as the acrylic sheet. Typical Tensol 70 is designed for bonding cast acrylic sheet. It will also bond extruded acrylic sheet, but will cause Extraction and ventilation is vital. Tensol releases fumes, dangerous to inhale. The fumes can ignite under the wrong circumstances. For this reason, extraction / ventilation is vital. Wear suitable protective clothing.
Tensol 70 is a two component, acrylic adhesive which hardens at room temperature by the polymerisation Once the adhesive has set the final bond strength can be increased by heat curing the material. This can
We don't currently have that one in stock
for 3 to 4 hours at 80oC. Thermoformed, highly stretched components may be heated for 4 to 5 hours at SW or AG grades and is not suitable for laminating sheets. Typical bond strengths are 24 MPa for a cold perspex together permanently. Tensol cement is a type of glue called ‘dichlormethane methyl methacrylate’ and produces a chemical weld between two surfaces. The glue is applied to the surfaces to be glued and they are pressed together. They should be clamped for 24 hours and this gives a permanent joint. Liquid solvent is applied using a brush or a syringe (often supplied with the glue). As it is a liquid, it is drawn along joints and surfaces through a process called capillary action. Care must be taken, as the glue damages exposed surfaces (as it melts the surfaces of the materials forming a ‘weld joint’). Dispense the refrigerated cement directly into the joint using a suitable dispenser. It is best to do this in
Great Deal 
New Comment