Invision Ultra Strong TV Wall Bracket Mount Double Arm Tilt & Swivel for 37-75 Inch (94-190.5cm) LED LCD OLED Plasma & Curved Screens - Up to VESA 600mm(w) x 400mm(h) - Max Load 50kg (HDTV-DXL)

Product Information

For some reason, while I was reading the reviews, alot of people were complaining that the instructions didn’t tell you to remove the TV mounting plate before assembly. between the sheet, firmly, looking over as I then slid the TV and wall bracket mounting lug over one another and ensured they mated perfectly.

No need for the bracket, just see which of those silver bolts fit, you'll only need to find *one* that fits, all the other VESA holes will be the same size as the one you find. SO i purchased one from argos and it seemed pretty good until around 2 weeks ago when it collapsed, the plugs gave way nearly breaking my TV.I like that the bracket has an overlaying plastic cover which comes off so you can hide all your cables behind. Full motion brackets are easily the most complex of the bunch, letting you extend the telly outwards, tilt or swivel it side-to-side. VERSATILE MOVEMENT: Use the VonHaus bracket flat to the wall or extended with a long reach mechanism - up to 37cm. Please do not feel any sense of urgency based on our data, we exist only to help you save money in a calm and well-thought out manner. This Mounting Dream model is our tilt mount of choice as it can be set up either flat to the wall or tilting down at up to eight degrees.

If you do not understand the instructions or have any concerns or questions please contact us or a competent installer. This product fits most 37”-70” LCD/LED/plasma screen, maximum weight of LCD/LED/plasma screen 50kg (110lb). This bracket gives you a tilt of eight degrees downwards and up to 50 cm extension, plus up to 180 degrees horizontal swivel – that’s slightly more manoeuvrability than our top pick. This Echogear model supports a broad range of sets - between 32 and 80 inches - and uses two pull cords so the TV can also be removed in a few seconds.Our compatibility promise is a commitment to ensure you can mount your TV to our bracket whatever the model. Up and down tilt is set and fixed and changing it afterwards is much less straightforward, so make sure you have it how you want it when you first put it up. Adjust the TV until level and once positioned tighten both security bolts with either screwdriver, ratchet and 10mm socket or Socket (10mm side) and Allen key ‘F’. All I can say is that they must of scanned over the instructions, because it does clearly state that you need to remove the mounting plate.

This product has been designed for use on vertical walls constructed of wood studs (minimum 2” x 4”/ 51mm x 102mm) or masonry (solid concrete 2000 PSI density minimum). Eliminate annoying glare with easy tilting operation and customize your viewing angle from anywhere in the room, up to 160° horizontal full motion swivelling feature left to right (depending on the size of your TV) and vertical tilt angle ranging from -5° to +8°. This refers to four pre-built screw holes you will find on the back of your TV – used to connect a mount.A huge majority of TV mounting brackets come with a poor selection of M8 bolts, and the Invision bracket is no exception. Extra-wide wall plate spans more than 24", accommodating wide stud spacing and on-wall placement flexibility.