DEWALT Diamond Blade for Masonry (DW4712B), Silver, 7-Inch

Product Information

As the cut progresses, focus your attention on the blade rather than the guide marks at the front of the saw, as these often become worn with use or obscured by dust Circular saws are highly versatile tools that will cut straight through most materials if used correctly. Here is a basic guide to circular saw use: If you are cutting wood, whether ripping or crosscutting, a circular saw is always something that you will have a use for. Circular saws are very versatile tools, and this is mostly thanks to that fast-spinning blade. Masonry cutting can be tough work, but with the right tools, it’s definitely doable. Just take your time and follow any safety instructions that come with your blade – and don’t forget ear and eye protection! FAQs Can You Use Any Blade in a Circular Saw? In addition to specialist models, UK tool vendors offer a variety of blades to optimise general purpose circular saws for different materials. If you will be working with one substance for a significant period, a specialist circular saw model might be the best choice. On the other hand, if adaptability is a higher priority, a different blade is probably more sensible (and cheaper).

Simply put, there is only so much space between the arbor or center of the blade and the guard on top of the saw that keeps you safe. Sure, you might be able to fit another half inch or so, but there is only so much space to work with. Mark the planned cut line along the target material using a tape measure, ruler or similar device. Make sure this is accurate to avoid waste. On darker materials, masking tape can also be used to mark the line of your cut However, if you have a diamond blade or a carbide-tipped blade, then you will be able to cut through concrete. Just keep in mind that these blades will wear down much faster than steel blades when cutting through concrete. Can You Put Masonry Blade on Circular Saw?Abrasive saws: these feature flat blades without teeth and are designed for use with tough materials like concrete and tiling

A diamond masonry blade for a circular saw is a great investment for anyone who does a lot of work with stone or concrete. These blades are designed to cut through extremely hard materials, and they can make short work of even the most stubborn projects. Here are some things to keep in mind when shopping for a diamond masonry blade: Ensure the item you are sawing is properly secured to your desk, using clamps and supports. This will prevent the work piece from sliding or slipping as it is being cut So, your circular saw’s main blade broke, but you still have a smaller one, maybe a 6-1/4” blade. Will this still work in a standard circular saw designed to use a blade that is 7-1/4”? The answer here is that yes, for the most part, you can use a smaller blade on a circular saw. Generally speaking, this is not going to be inherently dangerous. Although, it’s definitely not going to work as well as if you use the right blade. Necessary precautions mean wearing suitable gears to protect your eyes, ears, nose, and mouth. Using a dry diamond blade and cutting the stone is not safe; it creates a lot of harmful dust from the silica present in it. The unrequired part will come off either in pieces or in one go leaving you with the required part. You can now use that portion to fix it on the pavement or patio or wherever you need. Frequently Asked Questions Is Hiring Someone to Cut Stones a Better Idea?As long as the arbor hole is the same size, a smaller blade will do just fine. However, this does not really apply in the other direction. Using a larger blade with a circular saw that is not intended to hold a blade of this size is really never a good idea. It may break the saw or cause injury to the user.

It would be best if you chose diamond blades among various options available in the market, like steel blades, abrasive blades, carbide blades. The dust can be pretty lethal. It can settle in your lungs, leading to severe lung damage and breathing problems. So it is imperative to make sure that you do not cut the stone dry. Power cords are a potential tripping hazard and also restrict the movement of the tool operator. Cordless saws incorporate rechargeable lithium-ion (Li-ion) batteries as their power source for a significant increase in manoeuvrability and flexibility. Circular Table Saws Using chalk is a preferable alternative because you can clean the stone easily. The mark-up needs to be very precise. You can do it using a measurement tape — the clearer the marking, the more accurate the cut. Step #5: Use a Viable Water SourceHowever, the larger the blade, the slower it needs to move to remain safe. If the blade you want to fit onto the circular saw is rated for a much lower RPM than the saw itself, then the blade may break, snap, or cause injury. Spinning way too fast is a big issue as it puts the blade under too much pressure and stress. Ensure that any offcuts or waste material will fall cleanly away from the blade. This is especially important if you are left-handed because you will be holding the tool differently to your right-handed colleagues Using a circular saw is not a very daunting task. Of course, you need to be extra careful and follow all the instructions mentioned above. The first time can be intimidating for some, but if you do it just once, you will understand how it works, and the task will be a piece of cake for you. As you can see, it may very well be possible to use a smaller blade on your circular saw, particularly if you need maximum RPMs and speed.