iiyama XU2293HS-B5 22 Inch IPS LCD with Slim Bezel, 4 ms, Freesync, Full HD 1920 x 1080, 1 x HDMI, 1 x DisplayPort, TCO Certified, 2 x 2 W Speakers

Product Information

Approximate diagonal size of the display. If the manufacturer does not provide such information, the diagonal is calculated from the width and height of the screen. Want to play with friends? Just use the built-in, high-quality stereo speakers. Don't want to disturb anyone? Then plug in your headphones and turn up the volume.

There are various panel technologies. Each has its own specific features - viewing angles, color reproduction, response time, brightness/contrast, production cost, etc. The image quality depends directly on the type of the display panel used. Digital connection for the transmission of picture & sound. Necessary for high-resolution picture quality (HDTV). Since HDMI 1.4 (High Speed) suitable for transmission of 3D content in Full HD. For high-resolution picture quality in UHD, 4K or HDR, the connection via HDMI 2.0a and higher is suitable. HDMI 2.1 or higher should be used from 120Hz refresh rate in 4K. The pixel pitch shows the distance from the centers of two neighboring pixels. In displays, which have a native resolution (the TFT ones, for example), the pixel pitch depends on the resolution and the size of the screen. refers to the resolution of 3840 x 2160 or Ultra High Definition Television (UHDTV). This resolution corresponds to 4 times the resolution of Full HD. To record films with this resolution, special cameras are needed that can record at around 8 megapixels (4K).The operating humidity shows the acceptable level of humidity, in which the display will function flawlessly. It sets a lower and an upper humidity level for safe operation and is measured in percentage. The VGA connector is a 15-pin connector for image transmission on an analogue basis. It is also called DSub15 and is often found on notebooks and PCs. Compared to the other analogue connectors, it offers good picture quality. It can be screwed to the input or output device and can be adapted to YUV with a suitable configuration. Information about the minimum amount of time, in which the pixels change from one color to another. Very often the manufacturer provides the response time for transition from grey-to-grey (G2G). The elegant edge-to-edge design makes the ProLite XU2293HS a perfect solution for multi-monitor applications. The IPS panel technology achieves excellent and consistent colour reproduction with a wide viewing angle. The high contrast and brightness levels offer excellent performance in photography and web design. Details about the extent of our regulation by the Financial Conduct Authority are available from us on request.

The ratio between the horizontal and the vertical side of the display. Some of the standard and widely used aspect ratios are 4:3, 5:4, 16:9 and 16:10. Information about whether the stand can be dismounted. Usually, this is required for wall mounting.Stylish edge-to-edge design makes the ProLite XU2293HS perfect for multi-monitor set-ups. The IPS panel technology offers accurate and consistent colour reproduction with wide viewing angles. High contrast and brightness values mean the monitor will provide excellent performance for photographic and web design. Approximate width of the display. If the manufacturer does not provide such information, the width is calculated from the diagonal and the aspect ratio. Besides the DMD chip, the colour wheel is one of the most important criteria for image generation in DLP projectors. The colour wheel rotates constantly at extremely high speed and currently has 3, 4, 5 or, in some cases, even more colour segments. Through the colour wheel, the light from the projector lamp is alternately broken down into the primary colours red, green and blue practically without interruption. In modern projectors, the colour wheel also contains white and sometimes other colours such as cyan, magenta and yellow. With 3 segments, the colour wheel rotates at 3600 or 7200 rpm, with 7 segments at up to 14400 rpm. (4x speed). Each colour perceived by the eye in a DLP projector is therefore an extremely fast sequence of individual, differently coloured light beams until the actual processing. Because this technology sometimes does not use all the colour positions of the colour wheel for high-contrast images, or because the colours required for colour mixing are arranged far apart on the wheel, some viewers recognise the rainbow effect. This characteristic is more noticeable with slower colour wheels and slower rotation speeds than with projectors with faster and more frequently segmented colour wheels. The maximum number of colors, which the display is able to reproduce, depends on the type of the panel in use and color enhancing technologies like FRC.

TCO Certified, CE, TÜV-Bauart, EAC, VCCI-B, PSE, RoHS support, ErP, WEEE, REACH, ENERGY STAR®, UKCA We assume that Iiyama was aiming for a 6500K colour temperature with this setting, but it actually measured at 6367K, which isn’t a disaster, but if you’re sensitive to such things then you’ll need to create your own profile using the onscreen display (OSD). This is where the Iiyama falls down slightly: where other models utilise context-sensitive controls that show you what each button does before you press it, the Iiyama relies on the time-honoured and highly annoying system of rear-mounted buttons, but with no onscreen cues explaining what each does, it’s far from intuitive. It’s also too easy to accidentally switch off the panel by pressing the bottom-most button, which is the power switch. Information about the brightness of the screen. It is measured in candela per square metre (cd/m²). Size class of the display as declared by the manufacturer. Often this is the rounded value of the actual size of the diagonal in inches.

The term Full HD is used to describe devices that can physically display or output HDTV signals in full (1920 x 1080 pixels).