Joined in 2023 
82 
63 About this deal
For general-purpose sanitary sealing such as baths, sinks and shower units, Dow Corning 785 is a great option. As an inexperienced diyer using this kit was relatively easy. You can achieve amazing results but if you've never been good with silicone sealant I recommend you watch a couple of you tube clips of a guy using this exact profiling tool. He explains everything and shows exactly what you should or shouldn't do. I found it invaluable. Finally, a tool to get behind the very tight fitting taps would have been the icing on the cake. You can improve upon this method even more by pouring the boiling water onto a towel that's been laid on the floor. The towel will keep the water in one spot and retain the heat so that the mastic has more exposure. Start scrubbing an area of the concrete with the ammonia solution and a coarse bristle brush.As you go, remove the pieces of mastic that come up. Similar to the boiling water method, the ironing method applies heat to the glue. The hope is that the heat will make the glue gum up and be easier to scrape off.
Mastic sealant is used in shower cubicles to prevent water from seeping into places it should not. You might need to replace the sealant if it starts to peel off due to improper application or becomes moldy. You should ensure that the material where you are to remove the old mastic sealant is dry, as this will make it easier to pull it away from the surface. You can use a blade or scraper to get rid of the old seal, but you have to exercise caution to avoid damaging the walls or sink. You may need to use cleaning products to help get rid of hard to remove bits. It is essential to ensure that such cleaning solutions are suitable for the surface you are working on, more so when dealing with more than one material, like tile and plastic. A heat gun or hairdryer can also be used to loosen the sealant. Once the glue is removed, you'll want to clean the concrete to remove the remaining chemicals. Use a mop with fresh water and then allow the concrete to dry. You'll want to work in small sections to keep yourself safe from burns. Put a small pot of water on the stove or in an electric kettle and pour the boiled water on a select area. Make sure you're pouring the water very close to the floor so that you don't get burns from splashes.
The Dangers of Removing Mastic
Some models are meant more for sanding and polishing rather than grinding. If you have a tougher job with mastic, you'll want to consider choosing grinders that are meant for grinding specifically. If elbow grease and heat weren't enough to pull up the mastic, you might need to resort to chemicals. Make sure you are equipped with goggles, gloves, and masks so that you are safe from chemical splashes, fumes, and burns. If you’ve never used a mastic gun before, go and practice somewhere else, perhaps under the sink in your kitchen or under the stairs, anywhere where it’s hidden from view.
Commercial flooring contractors working with concrete will have floor sanders and floor grinders at their disposal. There are also floor grinding attachments that can be used with floor buffers or auto scrubbers. Start scrubbing the mastic with your acetone-soaked brush until the glue melts and lifts from the concrete. Wipe the mastic away with a clean cloth as you go, and clean the concrete once you're finished with a mop and water. Some methods of removing mastic also require harsh chemicals. You should try less severe methods to remove the mastic before you resort to more dangerous methods. Doing so could limit your exposure to chemicals while still achieving a successful removal. I'd highly recommend this product, especially for all DIY sealant jobs around the home. Easily cleaned. Reduces silicone waste too. Really no mess...and hassle free to use. Handy box to keep profile tools clean, accessible and damage free! A mastic sealant comes handy when sealing your windows, waterproofing your bathroom among other uses. However, the sealant can become ineffective due to old age, which is why it has to be changed from time to time. Removing old mastic sealant might seem an easy DIY task, but you can end up damaging the shower, sink or bathtub you are trying to reseal. This is why such work should be left to professional mastic sealant contractors.Hand-held concrete floor grinders are small and portable options. Less powerful models sand and polish, but don't do well with grinding. They usually have connections for a water source to allow for wet sanding, and they come with different speed options. The only way to get a professional finish with silicone is to use this kit, forget 'wetted' fingers, masking tape and all the other rubbish that people have told you, this kit, if used correctly, will give a finish that only professional can obtain, without the mess which is normally associated with silicone. LMA (Low Modulus Acetoxy) is a general-purpose mastic sealant that can be used indoors and outdoors. It works best on smooth non-porous surfaces. Low modulus means it’s very flexible.
Great Deal 
New Comment