Aquasure - Neoprene Repair Adhesive 28g Tube

Product Information

Air is either pushed through the Ozonair Unit with an air pump, then through an Aerator or it can be pulled through the unit by a venturi injection. Starting Dosage -The recommended starting dosage is 8 hours per 24 hour cycle when added to a new pond of any size (1000 gallons+). Since it is a thermoset urethane, cured Aquasure is impervious to solvents or extremes of heat and cold (-40F to +400F). The range of aerators produces huge plumes of fine bubbles that maximize the saturation of Ozone in the water, ensuring maximum efficiency and effectiveness.

Provides permanent, maximum-strength repairs to wetsuits, drysuits and many other types of watersport equipment including inflatables, etc.

Due to its stretch and flexibility, it can also be used for liquid seam seal repairs on wetsuits, neoprene boots/gloves and even spraydecks. Simply put, ORP is a measure of how clean the pond water is in terms of its ability to oxidize contaminants and organic waste.

The patented urtehane rubber formula provides tremendous chemical and abrasion resistance and is unaffected by heat or cold (-40°F to +400°F).Aquaseal also makes an ideal abrasion patch for high wear areas such as knees, seats and luggage bottoms.

Since aerobic bacteria require oxygen to break down organic waste The absence of oxygen provided by organic material allows algae and different kinds of “weed” to thrive.If after 7 days of application no change is noticed the dosage amount can be increased by 1 hour per 24hour cycle. McNett Aquasure+FD urethane adhesive is the industry standard for high strength permanent repairs to all kinds of dive equipment. Since UV sterilizers can handle high flow rates, it is not recommended that ozone be used in place of UV units.