Oxford EL570 Oximiser 900 Essential Battery Management System, Black/Yellow

Product Information

The suggestion was to deep discharge the fooked unit by attaching a car headlamp to it and let it run down. Please do not operate the charger in a closed area or restrict ventilation in any way. During charging, the battery must be placed in a well-ventilated area. Also, do not expose the charger to the elements, it is for indoor operating useonly. The Oxford Oximiser 3800 is capable of charging batteries from 1.2Ah up to 125Ah making it capable for carapplications. There are several chargers from CTEK in this list, and this CS ONE option is the top dog of the range. It's a smart charger that can repair, maintain, charge and detect bad cells, as well as a host of other features.

Fast and efficient charging in all modes keeps charge times short and reduces main power consumption Charge the unit, and then take it on tour. Once charged, it'll hold its power for a year and will recover a dead bike battery enough to start your engine in around 15 minutes. The charge is delivered to your battery progressively, too – reducing the risk of jump-start damage. It's absolutely superb and really works. Yes, it's a pricey solution, but it works brilliantly and is invaluable if you're off the grid where your bike lives. As above having issues with an Oxford charger. The battery in the zx10r hasn't been used in maybe 6 weeks, so it was too low to start the bike. Multimeter still said 11v left in it.The ‘charge’ mode gives a constant current of either 0.8 Amps or 3.6 Amps depending on the charge mode selected. Does it mean you can connect it to your bike whilst you are riding it, or just when it is instorage? November 30, 2011 I have bought a new battery and need pour in the acid to activate it and then charge it. Will this charger work for thispurpose? February 23, 2017 I bought this item and connected it up. It charges on bulk charge 0.87 amps then drops to maintain at 0.25 amps. I left it on for two days, the battery shows 12.8 volts plus, but it won't turn the engine over enough to start. If I use my old style car charger it will charge up ok but doesn't hold the charge for more than a few days even with the oximiser attached. Anyadvice? November 6, 2017 A professional switch mode charger designed to automatically maintain, optimise and prolong the life of a 12-volt battery. It can be left permanently connected to provide guaranteed long-term battery care. Heavily discharged batteries as low as 4.1V can be charged if the battery is not damaged.

The problem I suspect with this method is that I have tried and failed to charge a flatted battery using a Brand New optimate. The optimiser was never any use after this. AnswerThe Oximiser 3X can be used on lithium batteries, however all our other chargers have not been tested to be used on lithium batteries. The Oxford Oximiser comes supplied with a connection wire which can be permanently attached to your battery. The wire leading from the battery ends in a connection point which can be placed in a convenient position such as under the seat etc. Simple To Connect – Even as a newbie, I was able to connect the product without any difficulty. Once I had accessed the battery in my motorcycle, I clipped on the crocodile clips (positive first!), then attached them to the Oximiser device using the white connector. I then plugged the device into the mains, and it began working instantaneously. If you intend to keep the charger connected long term, the permanent fixture can be attached simply by securely screwing it to the battery. The whole process can be done in under 15 minutes: it couldn’t be easier! What length are cables that come with this, ie mains plug to charger and charger to bike. Also what difference between this and aniversary edition, same price except for a few coloured buttons on front? September 20, 2018

I don't really want to try push some juice into it with the other battery, as I don't fancy trying to bump start the ZX7R at 8am tomorrow in case of failure/battery death. This will be fine - let the battery stand for an hour before charging, and leave the cap off while charging for the firsttime.

Charging mode gives a strong charge until the battery reaches 85% and then reduces the current until fully charged The Oximiser 900 is an essential battery management system and designed specifically for smaller batteries such as those used on motorcycles and ATV's. The Oximiser 3X has three charging modes. One is for smaller batteries under 36Ah that charges at 14.4v and 0.8A. The next mode is for bigger batteries, MF and Gel and charges at 14.4v at up to 3.6Amps. The third mode is for AGM batteries as used in the stop-start systems on many modern cars. These require a slightly higher charge voltage of 14.7v at the same 3.6 Amps. In comparison my old Optimate III is a motorcycle-only charger with a maximum charge rate of 0.8A.I expect the charger is fully working, but if the battery was dud then the charger should tell me so...

And this one from CTEK is superbly clever. Not only does it do everything you'd expect: charging, recovering, conditioning and maintaining whatever vehicle battery you connect it to (and yes, it does them all, from Lead Acid to Lithium-ion in all wet, AGM, Gel and other forms) – it does it without any programming from you. If so, it would be better melted down and the lead recovered for fishing weights/musket balls. I see a positive from a negative there (pun). The measurements are approximately 34 inches from the plug to charger, the lead from the charger to the connector is around 37 inches, and there is around 12 inches length on the battery connection lead. There is no difference between this and the AnniversaryEdition. Battery chargers have come a long way in the last 10 years. Time was you needed a different unit for your bike from your car and the charging technology was clumsy and a bit ‘brute-force’. Smart chargers changed all that and many, like this one, have algorithms that assess the condition of your battery and apply the optimal charging cycle to keep it healthy. Oximiser 900 can be left permanently connected to provide guaranteed long term battery care. Suitable for all 12V ...

Contact

Knowing what the Oximiser 3X is doing in each cycle allows me to now use it properly and leave it connected for long enough to go through the full cycles; I find it simple to understand what’s going on and what state my batteries are in. It’s much easier to understand than my old Optimate III because the display tells you the voltage, charge rate and whether the battery is strong or weak.