MP90 Eco Xtreme, Protective Agent for Stone, Marble, Quartz, Granite, Concrete, Polished stoneware, Creates an Extreme and Eco-friendly Protection that limits the Absorption of Water, Oily and coloure

Product Information

Efter behandlingen kan du betræde overfladen efter 2 timer. Vand- og olieafvisende beskyttelse er aktiv efter et døgn. Du påfører MP90 i et jævnt ensartet lag med pensel eller poleruld. Du påfører produktet vådt i vådt og fugerne må gerne blive gennemvædet. Det er vigtigt, at du arbejder med små områder af gangen, så områderne ikke når at blive tørre. Fila MP90 ECO XTREME Sealer is an environmentally friendly natural effect water and oil repellent. It provides excellent stain protection for porcelain tiles, natural stone, marble and granite with polished, brushed and matt honed finishes.

Graffiti is bad for business, there’s no doubt about that, and it can even cause damage to decorative or delicate surfaces. To speed up the process, it is possible to treat the surface with a single-disc machine. The surface can be walked on after just 2 hours. Water- and oil-repellent protection takes effect after 24 hours. This means the construction efficiency of a project will be greatly improved, especially since the surface can be walked on after just 2 hours. Overfladen skal være ren og tør, der må dog gerne være restfugt i fugerne, før du begynder arbejdet med beskyttelsesmidlet. Thanks to the ultimate FILA technology, this water-based sealer is also safe to use in any setting. This means there’s no need to invest in a collection of products for every project you do – one unique stone sealer is all you need for high-performing protection!More recently, this sealer also obtained the Indoor Air Comfort Gold certification, which is a significant recognition that confirms its low emission of VOCs (Volatile Organic Compounds). These compounds are commonly found in different kinds of building materials used in indoor spaces, and we all know that high levels of VOCs can lead to an unhealthy environment.

With MP90 ECO XTREME , no dilution is needed, just shake, and this product is ready to go! For materials with a matt finish such as natural stone, terracotta and concrete, this sealer should be applied evenly onto a clean, dry surface, including the grout lines, with a brush or fleece pad. Any excess should then be thoroughly dabbed before the sealer dries with a clean cloth. For materials with a glossy finish like polished marble or porcelain tiles, again, apply this sealer evenly and continuously onto a clean, dry surface. Before the product dries (approximately 10-15 minutes), rub the surface with a wet microfibre cloth to further help the product soak into the surface before drying with a clean cloth. Depending on the material and the effect desired, a finishing wax can be applied to porous materials such as natural stone. MP90 ECO XTREME – Big protection, little impact Additionally, this floor tile sealer is certified GEV-EMICODE – EC1Plus and contributes towards a green building’s LEED credits. By earning a LEED Certification, your company can gain a competitive edge, improve its green reputation, and work even more towards sustainable methods. The FILA Solutions range is characterised by products that work to improve the performance and lifespan of a surface. Our new technology also allows architects and interior designers to improve the range of applications of the stone thanks to the higher performance of the products and Ultimate Shield Technology. Due to its water-based formula, application times are also drastically reduced compared to other solvent-based solutions. Apply Fila MP90 ECO XTREME evenly and continuously on a clean and dry surface using a brush or fleece pad, wetting the grout lines as well. Dab any excess product with a clean cloth before it dries. On highly absorbent materials, apply two coats of Fila MP90 ECO XTREME with a 20-minute interval in between.

Lad virke i 10-15 minutter. Tør overfladerne efter med en klud. Før produktet tørrer, skal du fjerne eventuelt overskydende beskyttelsesmiddel med en ren klud. Obstructions e.g. steps, lifts, gravel paths and drives etc may mean the delivery will have to be made to the nearest available location to the delivery vehicle. Additionally, this floor tile sealer is certified GEV-EMICODE® – EC1Plus and contributes towards a green building’s LEED credits. By earning a LEED Certification, your company can gain a competitive edge, improve its green reputation, and work even more towards sustainable methods. Our new technology also allows architects and interior designers to improve the range of applications of the stone thanks to the higher performance of the products and Ultimate Shield Technology. Due to its water-based formula, application times are also drastically reduced compared to other solvent-based solutions.