Safety 1st Prograde Front Loader Washer/Dryer Lock

Product Information

Still nothing? The pump may be broken and need replacing or you could have an electrical fault. A technician can help with this.

A burning smell coming from your washing machine can indicate a potentially dangerous situation. Immediately turn off the machine and unplug it. If your washing gets to the end of each cycle but refuses to spin, it could be down to something as simple as overloading your machine, causing it to become unbalanced. If you've jammed in too many heavy towels, for example, the weight can affect the sensors and shut off the machine. Re-balance the load and try again. Attach a wire connector. Twist the ends of the wires together and join them using a plastic wire connector. Alternatively, you can use a strip of electrical tape if you don’t have a wire connector readily available. If you're considering replacing your washing machine, our guide to the most reliable washing machine brands reveals which brands are less likely to let you down, based on the data we've collected from thousands of washing machine owners. Drainage – The drain pump removes excess water from the drum during each step of the wash cycle. If the drain pump is broken and either can't remove the water or indicate that it's done, then the machine won't continue to run. Strange noises coming from the machine during (supposed) draining is a sure sign there's a problem.Pull the string firmly to release the door catch. The door should spring open, allowing you to remove the laundry. Other causes include a faulty drive motor or pump. If you're still not sure on the cause call in a professional to inspect your machine. Washing machine isn't heating the water

If your washing machine door has jammed shut you need to find a fix fast. Leaving your damp clothes in the machine will cause your laundry and the machine itself to smell. The fact that you can see your clean clothes through the window, but just can’t reach them only adds to the frustration of the situation! If the feet are level, then it might be the surface causing the issue. Uneven flooring can create a shaky machine so you can try sitting it on a sturdy piece of wood or old desktop and manoeuvre the corners to even it out. To fix this problem, turn the machine off at the mains, and wait for five to ten minutes. After waiting, the machine should reset, and you should be able to open the door as normal. If you think your washer is creating a commotion, follow these easy steps on How to fix a loud washing machine.

Faults to look out for

If your washing machine won't stop vibrating or even moves around the room during a wash, it probably needs levelling out. Every washing machine has to sit level on a flat surface – and if it isn't it will shake, especially during spin cycles. Follow our five easy steps and watch the video on How to clean a smelly washing machine. Washing machine has a burning smell If any of the above have been answered with a yes, that is probably the cause of your problem. Fix this fault and the machine will function correctly again. If you answered no to all of the above, it’s time to consider if any of the following applies; Broken Door Strike To resolve these issues, all you need to do is remove some of the clothes from the washing machine and make sure there are no rogue items around the opening of the washer door. Now, inspect the drain hose. Typically attached to the waste trap under the sink, the drain hose will be connected via a spigot.