Tamiya Panel Line Accent Colour Paint

Product Information

To remove it, simply take the piece of paper towel used to dry your cotton swab and wipe the area down. And there you have the basics, shake, drop, dry and clean. Rudder and cleaned up panel lines Here’s an added tip, if you’re doing the entire model, or a good portion of it, I suggest using an eye dropper or pipette and put 5 or 6 drops in a small cup. Using either the cap brush or your own you can mix it more conveniently instead of shaking the bottle every time it’s needed. Use the same method for removing the excess as explained above, yet for raised bolts and rivets a fine brush will allow you to get in between those without removing the needed accent color. Cup on part with brush

Now let’s get a little more organic. One of the great features about these products is blending it for a more idea shade. Sometimes light grey is too bold. In this picture you can see I’ve cut the ratio 50/50 in a mixing cup. This will give that spot a look of being hit by the muddy wind of propeller air-wash. Brown and grey in cupNotice the difference between the pronounced detail in the lower part of the picture vs the bland upper half of the photograph? A much-improved look, something simple to do and takes very little time to pull off. Tamiya Panel Liner Completed Application USB Programmed board with soldered 1.3" oled screen for DIY project computer cpu gpu temp, framerate, load monitor, ram usage, and indicator Next, I’ve sprayed the part with AK Interactive Real Colors Air Superiority Blue, masked and sprayed semi gloss then gloss clear coat. Painted and varnished shot at a 45 angle Tamiya Masking Tape Holder - Holds 6, 10 and 18mm wide rolls with Anti-Slip Rubber Feet - Easy to swap out with Magnetic Top - 3D Printed

Lining Like a Pro 】　These enamel paints are ideal for highlighting panel lines and other details to give your model a more realistic depth. The paint has been pre-diluted into the ideal viscosity and can be easily applied into crevasses such as panel lines with the brush on the bottle cap. Once dried, any excess may be cleaned up by using enamel thinner. (Bottle contains 40ml)Plastic parts may become brittle. Avoid using on movable parts and take care when applying to load-bearing areas.