Napier Airgun Pull Through Kit

Product Information

And last but not least, don't forget to give the outer surfaces a good clean and polish with one of the field patches supplied in your Napier power pull-through kit. The BoreSnake, developed by US firm Hoppe’s, is similar to the traditional pull-through, but instead of using disposable patches, it’s the body of the snake itself that carries out the cleaning. Looking for the perfect cleaning kit for your air rifle? Look no further than Napier's Airgun Pull Through Kit! Our kit contains everything you need to effectively clean any type of air rifle, making it suitable for both .22 and .177 calibres. Easy-to-Use Design They are dangerous, as although they are very light and come to a complete stop within 15 yards or so, they are still capable of causing damage, so always ensure they are shot in a safe direction.

Napier Power Pull Through Kit | Air rifle cleaning kit

A: The best way to clean your air rifle pellets is with warm, soapy water. This will get rid of any dust and debris. When dried, they should be lubricated with oil to prevent oxidation. Cleaning air rifle pellets may improve accuracy and prevent fouling. Q: Can I use WD-40 to clean my air rifle? x 120ml Power Airgun oil Pump Spray (This contains exactly the same amount of active ingredient as the 200ml Aerosol version) This Napier pull-through is easy to coil up for storage and transportation – the loop may look fragile, but is actually pretty tough Drinking straw: A straw gives the pull-though a head start any time you’re trying to clean a barrel that doesn’t offer direct access to the muzzle, such as a shrouded barrel with a non-removable end cap. Some snakes have phosphor bronze bristles embedded in the body for extra cleaning power, and as long as you pull the snake concentrically they won’t do your bore or O-rings any harm.A secondary benefit of bore paste is its deep cleaning ability, and some shooters like to use it as an occasional cleaning product in addition to its intended use of prepping a new bore. Bore paste is meant to be applied to either a patch or brush, and rodded down a barrel.

Gun Cleaning Kits | Gun Maintenance Accessories | Airgun Depot Gun Cleaning Kits | Gun Maintenance Accessories | Airgun Depot

You can tell how dirty the barrel has become by looking at the accumulated lead that’s been removed from the lands and grooves of the barrel A drinking straw can be useful when trying to guide a pull-through down a shrouded barrel where the muzzle isn’t always easy to findThat’s it: job done. You’ve now carried out a deep clean of your bore without using any nasty jags or brushes that could cause damage. These are great for powder-burners, but are not recommended for airguns. All that’s left to do now is re-lead your barrel by firing some pellets down the tube. Accuracy may be woeful at this stage, but as the barrel starts to regain its optimal level of leading – and this can take anywhere from 10 to 50 shots – your rifle will start shooting far straighter than it did before! Napier's Airgun Pull Through Kit contains everything you need to effectively clean any type of air rifle, and is suitable for .22, .20, .25 and .177 calibres. So what are you waiting for? Make sure you're using the best products to achieve the ultimate accuracy with your air rifle. Choose Napier gun care products and experience the difference for yourself! Once the pull-through loop is in place, consult your instruction manual to determine how many patches you'll need for your calibre. Attach the patches to the loop and pull through the air rifle, examining the patches for fouling. Repeat until they come out clean.