TIME-SERT M6x1.0 Thread Repair kit #1610

Product Information

The insert is provided with a built-in flange that automatically positions its depth during installation.

The tool kits listed are the "Internal size". Metric Example: If your bolt is M6x1.0 and your stripped thread is M6x1.0 you will need a M6x1.0 thread repair kit. Inch Example: If your bolt is 3/8-16 and your stripped thread is 3/8-16 you will need a 3/8-16 thread repair kit. The thin wall is made possible because the internal and external threads of the insert are synchronized. The small outer diameter of the insert allows for installation in locations where space is a premium. TIME-SERT® Positive Placement. Having a flange on the top of the insert will insure that the insert will have positive placement and cannot wind down into the newly repaired hole. S.T.I stands for "Screw Thread Insert" an example would be a TIME-SERT M8x1.25 repair kit would require a M8x1.25 S.T.I tap, this is "larger" than a standard M8x1.25.loctite 266 is recommened because of it's higher temperture. Normal red loctite e.g. part numbers 277 or 271, burn away at 200 degrees which is the normal operating temperature of most engines. What type of spark plug do you have? Washer seat or Taper seat. Washer seat sparkplug's will have a washer to seal the spark plug against the head. Taper seat spark plugs will have a taper to seal against the head. This is common on all inserts, if some of your inserts only screw on a few threads of the driver tool don't worry the driver tool will screw through the insert fine when installing. Of course always use oil on the install driver tool when installing inserts, this can be a 30wt motor oil. Yes, loctite may be used on the external threads of the insert, due to the solid wall design there is no danger of it leaking thru to the internal threads. After the hole is drilled, counterbored, and tapped... clean the hole so that it is free of chips in preparation for installation of the insert.

Our loctite p/n 6020 is required on taper seat spark plug inserts. Only the taper seat style spark plug inserts require loctite not washer seat. We are sealing on the built in taper of the insert so we have a perfect seal from the spark plug to the insert but we need to insure that the external threads of the insert are sealed by the loctite to keep any gases from passing by the external threads of insert as a precaution. Ford spark plug Repair kit p/n 5553 to repair blown out sparkplug's. Ford Triton Sparkplug repair kit includes all the tools and 5 inserts. The problem that can happen is the reamer did not ream all the way thru the hole so it leaves a step in the hole that will STOP the tap because the 45 degree counterbore was not fully done. This can happen because of 2 possible things. The reamer is hitting a VALVE or the top of the PISTON which is stopping it from entering all the way. No! Because the oversized drain plug has oversized the hole in the drain pan making it larger, so the insert will not hold properly. The 1485 kit will work by reducing the hole from M14x1.5 to M12x1.5 there is no drilling because the tin pans are to thin and the thread would break out entirely. So no oversized drain plugs in tin pan repair. When you get to top dead center you won't feel anymore pressure use a wire hanger put down the hole.expressly retains the right to make changes or discontinue any product it manufactures or sells at any time and without notice. Once the insert is seated, reverse rotation of the tap handle to remove the installation tool driver from the installed Time-Sert. Würth offers you several thousand variations in our range of professional tools to meet all the requirements of your business. For more than 50 years, we have been developing state-of-the-art professional tools which are synonymous with innovation and quality. Mechanics, carpenters, landscapers, plumbers and many more professions can increase their productivity and meet the needs of your customers with our range of high-quality professional hand tools.‎

Because the external thread diameter and pitch is determined by the dimensions of the internal thread of the insert, the resulting external thread does not correspond with a standard tap size. TIME-SERT® is thin walled due to synchronized internal external threads. Thin cross sectional area allows for installation in areas of limited space and clearance material. Yes Spark plug repair can be done without removing the head by placing a heavy grease on the step tap flutes to catch the chips. TIP: mechanics have mentioned that using a shop vac with a plastic tube taped to the nozzle end works well for removing any stray chips left over. If multiple inserts need to be installed this can also be done using a CNC with a tapmatic reversing head. Why does the NorthStar2000 p/n J-42385-2000 and the NorthStar BIG-SERT p/n J-42385-500BS have 2 lines on the tooling? When the NorthStar J-423385-500 kit only has one.We recommend our loctite p/n 6020 on the external threads of the insert in head bolt applications and commonly include p/n 6020 in many head bolt kit applications. Tests in the laboratory have shown that the Time-Sert repairs are equivalent to the original threads in most cases.

Using a tap handle, rotate the installation tool driver to thread it into the insert. The tap handle will be more difficult to turn as it expands the partially-formed threads at the lower end of the insert. Continue turning until the tap handle loosens-up and becomes easier to turn. The diameter of the spark plug will be the size. The threads or pitch will be a standard for the diameter. Example if the diameter is M14 the standard pitch will be 1.25 or M14x1.25. TIME-SERT® is a solid bushing insert. This guarantees easy installation and allows for full load use of tapped hole, ensuring protection against stress and vibration. Customers have found in their own testing data that TIME-SERT’s have exceeded their expectations. Many of our larger customers will test TIME-SERT’s before placing them in critical applications and find excellent results. No, you cannot repair a helicoil with a TIME-SERT because the are too close in size. We can offer a larger diameter insert called BIG-SERT Link: BIG-SERTWhy does the installation of a Time-Sert require the use of an STI tap? What is an STI tap? Can a standard tap be used instead? TIME-SERT ® inserts have a flange, which will give them a positive placement on installation for “accurate specific depths”. This ensures that the insert does not wind down into the threaded hole.