Kit Repair Porcelain - PORC-a-FILLER - Porcelain Chip Filler

Product Information

Once the surface is clean, use tape to isolate the chip. Masking tape works too, but whatever you use, press it tightly to keep it from moving. 2. Application Sand the filled area, once completely dry. Use the 220 grit sandpaper to remove any surface imperfections and ensure that the fill is slightly below the porcelain surface to allow for the glaze application. For homeowners, watching chips or scratches in your porcelain surfaces is very frustrating. First, because it ruins the overall decoration of the house; and secondly, because of the amount you’ll have to spend on services to fix it.

selected areas. Clean the entire piece with alcohol to prepare the surface for painting and cold glazing to hide the repair lines. and colored hardeners mixed with additives to create strength. Matching colors, texture, and sheen is the longest and the most difficult part of process to mastering ceramic restoration. The match must be perfect if it’s expected to be invisible. To make sure this area is totally dry, carefully wipe just the repair area with a small amount of acetone after cleaning. In dry conditions and warm temperatures and humidity, EASYJoint should be firm enough to walk on within 24 hours and will cure hard within a few days. Tiling Adhesives & Grouts We offer a range of tiling adhesives, grouts & silicone for installing porcelain, glass, cement, marble, mosaic, granite and limestone tiles securely to your walls. Our tile adhesives and grouts are heat, mould and water resistant and perfect for fitting tiles in your bathroom or kitchen.

It is almost impossible to find a repair kit capable of leaving a finish that matches with the rest of the surface. In those cases, it is worth noting that most of these brands offer a solution by mixing their formulas. Such is the case of Sheffield Bronze. Paving, Pointing & Grouting We offer a range of pointing and grouting materials for jointing your patio slabs, outdoor paving or driveway including flowable slurry grouts such as UltraScape Flowpoint, brush-in grouts like EasyJoint and gun injected mortar for fine pointing. As well as supplying paving primer, sealants and paving and driveway cleaners. Tarmac & Pothole Repair We offer a range of permanent pothole repair & pothole filler materials such as Ultracrete Permanent Pothole Repair, instant tarmac including Ultracrete Instant Road Repair 6 & 10mm, cold joint sealants, line marker paints and anti-skid patch repair. Note: When mending more porous materials such as terra cotta and plaster, heating the surface to 90°–110°F prior to the epoxy application on both sides of the object improves bonding. Be aware, heating also reduces workability

It shouldn’t have to be necessary, but it is if you want to get the perfect finish.Keep in mind that this product has a strong smell, though. Be prepared. Now, follow the instructions provided by the manufacturer and prepare the mixture. Follow up by adding the formula over the desired place. Freezing conditions are not always problematic for EASYJoint, however the volume of water used during the application process can potentially freeze. In this instance the particles within the grout mix won’t settle into the joints evenly due to the presence of ice and potentially lead to longer term problems.

How to Choose the Best Porcelain Repair Kit

These kits include a bottled formula, and sometimes, a brush or another medium to apply said formula over the porcelain. You can use it to fix chips, fill spots, and remove scratches, among other things. Please Note: This information is for guidance only, the above table is to be used as an estimate of the amount of EASYJoint required, we always recommend purchasing an additional 1-2 tubs to ensure that you have enough – it will also keep due to the unlimited shelf life.