COMBIMATE Combiphos Refill

Product Information

The product is also supported by a professional customer service team with first class technical and spares support. Cost-effective: By preventing the buildup of limescale and corrosion in hot water systems, the Cistermiser Combiphos Refill can help to extend the lifespan of your system, which can ultimately save you money in the long run This reinforces our statement of Sustainability without Compromise, ensuring that we practice what we preach whilst consistently providing our customers with fantastic service. There are two installations options when fitting Combimate: whole-house supply or single appliance protection. Yes. If the Combimate is located in a warm environment (e.g an airing cupboard) or near a heat source, the Combiphos crystals will dissolve at a faster rate. Ideally Combimate should be installed at room temperature with a cold water supply, located at least 450mm from any appliance or local heat source to prevent water in the dome from warming and accelerating the dissolution of the Combiphos.

High-quality: Cistermiser is a well-known brand in the water treatment industry, and the Combiphos Refill is made from high-quality materials that are designed to last This action prevents the formation of scale while retaining the health benefits of the natural minerals contained in hard water. Combimate does not use magnets or any electricity in its anti limescaleoperation and is both easy to install with minimal maintenance. Tried and tested– Combiphos is a polyphosphate compound specifically developed to provide the most effective limescale prevention in flow-through installations. Polyphophate dosing has been safely used to treat water throughout the world for many years.Combiphos is 100% food grade material approved by the FAO/WHO and compliant with the European normative standard BS EN 1208, that prevents scale build-up and soft water corrosion in combination boilers and other domestic hot water appliances. Fitting is simple – the only plumbing required is to route and connect two pipes, plus fixing the unit to the wall. This job can take less than one hour. Combimate is an inline scale inhibitor and can be fitted to the majority of pipework configurations. Combimate refill balls are added to the water supply in minimal quantities, sufficient to keep mineral ions in suspension.

Yes. Replacing the Combiphos is easy if the procedure is correctly followed or refer to the owner’s manual supplied with the Combimate unit. Effective: The phosphate-based compound in the refill helps to reduce the buildup of limescale and corrosion in water systems, which can lead to improved performance and energy efficiency Limescale doesn’t just form on taps and shower heads. Limescale can form on any surface where water is heated, including the internal surfaces of pipework and boilers. Below is a list of places where your home is vulnerable to the damaging effects of limescale formation: Easy to install: The refill is easy to install, and it comes with clear instructions to help you get started

Yes. Combiphos is classed as a ‘food grade’ additive which conforms to European Standards EN1208 and World Health Organisation standards as a safe additive to drinking water.

Combiphos also coats the inside of the pipework, boiler heat exchanger and appliances with a non-residual, microscopic, protective coating. This again prevents scale-causing minerals from accumulating and aggressive soft water from corroding the system and appliances. Eco-friendly: The Cistermiser Combiphos Refill is eco-friendly and does not contain any harmful chemicals that could harm the environment In a central heating system, Combimate will only protect the boiler via the mains water feed into the heat exchanger. However, the ‘closed loop’ of the heating system (radiators, pipework etc) is not protected. Combiphos coats the inside of the pipework, boiler heat exchanger and appliances with a non-residual, microscopic, protective coating to prevent scale-causing minerals from accumulating and aggressive soft water from corroding the system and appliances.No. Combimate is not a water softener; water softeners generally use salts so softened water requires a separate supply because of the increased salt content. Apart from the annual replacement of the Combiphos crystals, Combimate requires no other maintenance.

If you are a visitor, you will have to enter your details in full. If you have an account, then the default information will show. You can then amend where necessary and press ‘continue’ to save.

You may also like

Combimate is not a water softener but a phosphate dosing device. Combimate does not alter the hardness (or softness) of the home’s water supply but through the process of adding phosphate prevents limescale build up and provides softwater corrosion protection Function: This product is designed to refill the Cistermiser Combiphos water treatment system. It is a phosphate-based compound that helps to prevent the buildup of limescale and corrosion in hot water systems