thorityau Halloween Witch Cauldron Fog Maker - Halloween Cauldron Mister - 12 LED Cauldron Black Witch Kettle - Fog Machine With LED Light - LED Mist Maker Sprayer Decoration For Halloween Party

Product Information

Frozen Hands: freeze water in clean plastic gloves, remove the gloves,and float "hands" on top of a simple punch, this looks great on a bloody red punch! I glued a stiffener to the top and bottom edges of the mount to give it strength. I drilled two holes in the Mount; one the diameter of the transducer opening and the other to accommodate the solder connections since they sit proud of the disk.

The main build of this Instructable is essentially a small Fog Module that just drops into the mini plastic cauldron. This Fog Module is ideal for this mini cauldron but can be used anywhere you want a mini source of fog/smoke. Place the circuit board (with the battery folded under it) into the plastic cauldron, place the PVC pipe with the sheet glued onto the bottom into the cauldron on top of the circuit board and mark the height of the future water cup (at the top lip of the cauldron) on the PVC pipe with a pen. Sure, some of you go-getters may have already hosted your parties. Others are like me and wait until the final two weekends of October to host your parties. Then we opened up the styrofoam cooler I stored mine in after purchasing it and used a hammer to break it down.I wanted the LED illuminating the fog to automatically turn on when the cauldron was running. The Circuit Board has a blue surface mount LED that lights when the atomizer is operating. I wanted to use this fact to light the green LED in the Water Cup when the unit operated. Not knowing the ability of the integrated circuit to drive two LEDs I had the thought of disconnecting the blue LED and connecting my green LED in its place. Bake a spooky Halloween Cakefor your party with orange and chocolate marbled cakeinside, and a cemetery all made in chocolate! Going from seeing the plastic party favor cauldron in the store to the finished Mini Halloween Cauldron took a bit of experimenting.

Watercolor paper is large. We often cut our paper in half for our projects, but you may choose to use a full sheet. I provided two different size cauldron templates for your convenience, one for a full sheet and one for a half.) Lithium batteries are nothing to take lightly. They can overheat, explode and start fires. If the battery gets hot it can be disconnected by cutting the foil battery tabs with scissors. Try to avoid shorting the foil tabs of the battery together with the scissors while cutting.

2 People Made This Project!

We wanted a Halloween punch non alcoholic version, and there are so many fun ideas to try for kids! ~Julie How To Make Colorful Halloween Punches