About this deal
The smaller cross-section of the adapter has no impact on the air conditioner’s cooling and exhaust air performance.
The only challenge may be the required removal of the warm air to the outside, depending on the room situation. is a load spreader to fully sandwich the bulkhead plate o-ring against the bulkhead/firewall which will ensure a fully watertight seal.The further a window is opened to discharge the warm air to the outside via the exhaust air hose, the more warm air manages to get back into the room through the window, which significantly impairs the cooling performance and energy balance. For example, if the window cannot be opened completely for reasons of space or must not be left open for safety reasons. There are many options available including a number of different bulkhead plates and fittings for Air Conditioning, Push-On Hoses, and AN adapters for Water, Fuel, Oil and Power Steering lines. Convert 5/16" Male SAE to 1/4" Female SAE swivel adaptor perfectly fits for R410a mini split system air conditioners, HVAC, and refrigeration service. Rear view of Challenge 5000 BTU air conditioner converted from single hose to dual hose with a tupperware box (slightly closer view).
If the exhaust hose of a mobile air conditioner does not fit through the window opening due to its diameter, the window nozzle from Trotec is the practical solution to transport warm air comfortably and safely to the outside - without requiring technical effort or the intervention of craftsmen. It increases convenient application and furthermore improves the air conditioner's cooling efficiency. The narrow Trotec window nozzle has been designed in such a way that it does not impair the proper operation of mobile air conditioners. The window nozzle is also an ideal addition to the energy-saving Trotec window sealing AirLock 100 and AirLock 1000. The exhaust air hose adapter harmonises perfectly with white windows and allows the warm air to be discharged through the window almost imperceptibly from the outside.
These units are fully sealed with O-rings front and back to ensure a watertight seal, no sealant or gaskets required. Depending on the room situation, just having to discharge the hot air to the outside can already present a challenge. Whether you require a bespoke heater, fuel hose and fittings, technical support or even a single titanium bolt - we have you covered.