About this deal
DCS-BIOS, if you are using DCS-BIOS then make sure the setting DCS-BIOS json location points to the correct folder. Usually the default setting is correct but if you are using DCS openbeta then you will have to change this. Leftmost number on lower LCD row (0x0-0x9, 0xA above will darken the digit position, except 0xEE which will show a dash) DCSFlightpanels communicates with DCS using DCS-BIOS, the brainchild of [FSF]Ian. [FSF]Ian has been very helpful in answering questions and helping out during the development process. His contribution to DCS will change the user experience from now on for a lot of us. If you get the chance then say "thanks" and give him some positive rep!
You can use several panels of the same type and have different mappings on each except Radio Panel which is fully programmed by DCSFlighpanels The Switch Panel functionality has been great from the get-go and remains so. He has already released a version of FlightPanels that precludes the need of a special driver and we now have use of the LED indicators. :thumbup:EDIT2: After some googling I came over another device driver and tried it. It seems to work: https://drivers.softpedia.com/get/KEYBOARD-and-MOUSE/LOGITECH/Logitech-Flight-Instrument-Panel-Driver-8-0-124-0-64-bit.shtml Toggle between 15 different displays, or utilize additional units to create a larger configuration which simultaneously displays multiple panels. Twin dials and a set of hotkeys simplify switching between various readouts.
Open DCS Script folder [drive:\Users\
When I start Spad.next, it says “The FIP with Serial MZXXXXXXXX could not be found. This is most likely because the Saitek FIP Drivers are not installed.” It displays this message for each of my 6 FIPs. The other Logitech products work fine.
Any data from HWInfo can (optionally) be displayed. This also works when Elite Dangerous is not running. Tried to create this panel, for controlling MFD.
EDIT: I have powered HUBs, both USB2 and USB3. I also started Spad.next as administrator. The only warnings Spad.next displays is about the missing device drivers. Restarted computer between each attempt, all different combinations of uninstalling drivers, unplugging FIPs before driver installation etc. Is there something I have missed? Please help, no fun flying now that I have gotten used to my setup…
b]Close down DCS, delete all logs under C:\Users\