Dryzone Damp Proofing Cream (DPC) - 310ml - High-Strength Injection Cream for Rising Damp Treatment. BBA & WTA Approved

Product Information

In walls of a thickness greater than 350mm, it is recommended that drilling is undertaken from both sides at a corresponding height.

In the case of drill holes becoming blocked these should be re-drilled just prior to injection or a new hole should be drilled nearby to ensure that an adequate volume of DampSolve is introduced.Where traditional pressure injection fluid cannot be used, Dri-Wall DPC Injection Kit is the answer.

Effective and Safe Protection against Rising Damp - creates a horizontal barrier against rising damp. You will need to remove all the damp contaminated plaster (it will be contaminated, even if it looks dry) and drill a series of holes in the mortar joints at 120mm intervals, ideally at 150mm above ground level.For more information on installation read our Guide to Using Damp Proofing Cream to Treat Rising Damp - it takes you through all you need to know including things to avoid. Damp proof cream works by preventing the process of water entering the home via rising up through the capillaries in brick and masonry surfaces (also known as rising damp). Launched in 2000, Dryzone Damp-Proofing Cream has caused a revolution in the treatment of rising damp. Extensive field experience with this technology demonstrates that Ultracure© will perform as well as any conventional liquid injection system against rising damp.