Engine ice Hi-performance coolant - tyds008 - engine ice 81081100

Product Information

I looked up "NAP Free" and it means "NO NITRITE, NO AMINE, NO PHOSPHATE, and NO SILICATE", therefore Zerex G-48 is still an option. As an FYI, Peak EOT 50/50 Blue Asian Anti-freeze has a freeze point of -34F to give you some frame of reference. DO NOT MIX: PC Ice includes an Anti-Microbial agent, we do not recommend mixing any other anti-algae or anti-microbial agents with the PC Ice fluid, this includes Liquid Utopia. I suspect you would defeat the advantages of the superior heat transfer ability of waterless coolant if you added water. Virtually every liquid-cooled powersports vehicle will benefit from using Engine Ice in their cooling system.

One of the anti-corrosion components presented as Sodium or Potassium 2-ethylhexanoate and Ethylhexanoic acid is incompatible with Nylon 6,6 and Silicone rubber, and is known as Plasticizer. That bleed screw is at the high point of the coolant system so the air in the system should settle there. When winter comes and there is snow on the ground, there is no better feeling than jumping on your sled and heading off into the fresh powder. As for the plastic plug, my manual shows an allen metal bolt, so I guess earlier models had a metal one.

In a service department scenario, the recommended action is to flush and change simultaneously with an oil change. Make specific there is no oxygen using the lines by examining the oxygen bleed valve below the oxygen box. Engine Ice keeps them cool under the pressure of competition where one wrong move by the driver is the difference in the winner's circle or into the wall.

Like I said it's a metering jet for trans lubing the center section of the gear box and nothing coolant related. From Motocross to Road Racing to ATV Racing and Auto Racing and Karting, Engine Ice Hi-Performance Coolant has proven to be the best. Thanks, what I noticed is apparently all the orange HD coolant and then the water to clean it where drained from the system, but the level in the plastic tank didn't seemed to lower even when there was nothing else pouring from the drain plug. Sometimes they are yellow and other times orange, so it’s easy to get them confused if you use color as a predictor.According to internal GM documents,[citation needed] the ultimate culprit appears to be operating vehicles for long periods of time with low coolant levels. g., Zerex G-05[19]), both of which are claimed to have an extended service life of five years or 240,000 km (150,000 mi).

Flushing the system as directed is the best way to ensure your new coolant performs at its best and provides dependable results for best results, flush with Engine Ice Flush Treatment or an equivalent product. Rapid Cool Blue Antifreeze contains corrosion inhibitors suitable for aluminium engines and is suitable for use in petrol and diesel engines. If you fill it to the top, just warming up to 255 will force some coolant out due to expansion, but the coolant level should settle out right about where the cold coolant is just at the tops of the radiator core tubes. We offer a wide range of products to meet the specialized needs of your specific machine, all while delivering proven performance and reliability. Registered office: Klarna UK Limited, 7th Floor, 33 Cavendish Square, London, W1G 0PW, United Kingdom.Twisting the throttle in the canyons, sitting in traffic on your commute, or even seeing what your bike can do during a track day, Engine Ice is the coolant for you to keep your bike running its best. Before adding coolant your cooling system must be clean and have no chemicals of any kind left in the coolant loop. This exposes hot engine components to air and vapors, causing corrosion and contamination of the coolant with iron oxide particles, which in turn can aggravate the pressure cap problem as contamination holds the caps open permanently. In your case you wish to change colors so you need to empty the content of the overflow bottle manually.

More than a single product, the Engine Ice family of products is professionally formulated to provide thermal management and maximum heat dissipation for the specialized cooling systems found in today's high-performance powersports and motorsports vehicles.To avoid cross-contamination of incompatible fluids, drain the system, flush your cooling system with a 50/50 distilled water/white vinegar solution or relevant Flush and Clean product, follow up with a distilled water flush, and then refill with the appropriate Engine Ice product.