276°
Posted 20 hours ago

TP-Link AX1800 Wi-Fi 6 Dual Band Gigabit Ceiling Mount Access Point, Omada Mesh, Power over Ethernet (802.3at) or DC, Easily Mount to Wall or Ceiling, Free EAP Controller Software, Easy use (EAP610)

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

I also noticed that the EAP610 has the same antenna gain as the EAP610-Outdoor and it’s no surprise considering that the two devices are pretty much the same, just that the latter has an IP67 case to protect the components from the weather elements. One other curiosity is that the model that I am going to test is the v2.26 and yes, the changes from the v1.0 are at the hardware-level. Explanation of portal authentication failure after EAP is extended with Range Extenders 11-22-2021 31516 Worried about interrupted streaming when moving?Seamless Roaming of TP-Link solves this issue! Omada access points are equipped with802.11k and 802.11v fast roaming, switchingclients automatically to the access point with the optimal signal with a seamless transition when moving.

Smart Detection (motion detection, intrusion detection, line-crossing, camera tampering, object removal detection, object abandoned detection) Omada Mesh, Seamless Roaming, Captive Portal, and Cloud Access require the use of Omada SDN controllers. Please go to https://www.tp-link.com/en/omada-mesh/product-list/ to find all the models supported by Omada mesh technology, and refer to the User Guides of Omada SDN controllers for configuration methods. Provides powerful wireless performance while significantly reducing WiFi interference by automatically adjusting the channel settings and transmission power levels of neighboring APs in the same network. To maximum the safety of enterprise and your home WiFi, TP-Link is inserting WPA3, the latest encryption technology, into Omada access points, WiFi routers, range extenders, and more devices. Yes. Requiring the use of Omada Cloud-Based Controller (Supported by EAP610-Outdoor v1.20 and above, while not supported by EAP610-Outdoor v1.0).

To Use Third Party Firmware In TP-Link Products

TP-Link's 10G/multi-gigabit managed switches are equipped with 10 Gbps fiber, 10 Gbps copper, or 2.5 Gbps Copper ports, offering maximum performance and low latency. Reliable and lightning-fast connections to WiFi 6 access points, storage servers, and other switches and devices are easily established. To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device. Using Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported) 07-07-2023 15303

PoE+ Powered:Supports both Powers over Ethernet (802.3at) and DC power supply for flexible installations. Provide high levels of performance, scalability, and cost-effectiveness that SMBs require from their 10G networking solutions. Zero-Touch Provisioning and Auto Channel Selection and Power Adjustment require the use of Omada Cloud-Based Controller.Please go to https://www.tp-link.com/en/omada-cloud-based-controller/product-list/ to confirm which models are compatible with Omada Cloud-Based Controller. Yes. Requiring the use of Omada Cloud-Based Controller (Supported by EAP610 V1, V2, V2.2 and above, while is not supported by EAP610 V3) What's the difference between Master Administrator, Administrator and Viewer account in Omada Controller? 04-20-2023 15070

There’s the mandatory OFDMA, MU-MIMO and Beamforming which are pretty much a standard for the WiFi 6 access points. Plus, we get support for the mesh technology, so it’s possible to add the TP-Link EAP610 to a larger mesh network. There is support for 1024QAM, but the channel bandwidth goes only up to 80MHz, which arguably is more than enough in most cases (if the WiFi is very crowded, you may even be forced to downgrade to 40MHz on the 5GHz band). TP-Link EAP610 WiFi 6 Access Point. Flipping the board upside down has revealed the quad-core 1.2GHz Qualcomm IPQ6000 SoC, the 256MB of RAM from ESMT (M15T4G16256A), the 128MB of flash memory from ESMT (F59D1G81MB) and the Realtek RTL8211F highly integrated Ethernet transceiver (10/100/1000BASE-T). Omada Mesh Technology: Enables wireless connectivity between access points for extended range and flexible deployment**

Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product. Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon. Using the Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported) 06-08-2023 15303 I'm not running a huge office, so I don't have much use for a power-over-Ethernet (PoE) switch. A smaller business wouldn't necessarily need one either. However, suppose you're operating a quaint café, a compact store, or anything that requires just a touch more than a single wireless router. In that case, these little ceiling-mounted access points (AP) can be beneficial without needing to go all-in on the TP-Link Omada range. Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations. §Exceptional performance with compact design ensures simple WiFi installation while saving space. The elegant appearance makes EAP610 perfectly blend into any modern office, hotel, classroom, or café.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment