Joined in 2023 
82 
63 About this deal
After you’ve successfully calibrated your scanner, you can start your first scan. When you start a new project, EXStar asks you to create and name a new folder for it. EXStar prompts you to hold the scanner at different distances and angles from the plate. If you are new to 3D scanner calibration processes, you might need to get the hang of some of the angles. Make sure you follow the same movement shown on the software interface. The process was really easy, too, and took under 10 minutes for both calibration types: one regarding geometrical precision and the other dedicated to colors.
Objects that are too simple, like a vase. Again, since the vase looks the same from all around it, the scanner wouldn’t be able to differentiate one side from another. Automatic alignment is an incredible feature at such a low price, and the best part is that it worked perfectly. Less than 30 seconds after launching the auto-align feature, we obtained the 3D mesh. Mesh editing Here, you must indicate whether you’re scanning a person (for a 3D face scan) or an object. If you select “portrait” mode, you can move on to the next setting.Finally, copy theactivation filetothecomputer without internet access and import it to the EXStar software, then offline activation is done! Note : If you are using a laptop or a PC that has an integrated graphic card it will look like in the picture below with 2 options, the one that you need is the Nvidia Box, this will differ for each case. Format (P3): No texture, data type is marker position, saves as Scan, p3, recommended for create Global Marker File and measurement of the marker position. As you’d expect from so many generations of products, they just keep getting better all around. In terms of performance and software, there’s always been constant evolution over the years, and we noticed an even bigger step up when reviewing the HX. If the value of the score is 2400 you can run the software, but we would recommend having a processor that passes the score of 4000. If the value is lower than 2400, you will need to upgrade the hardware CPU.
Format (ASC): No texture, data type is optimized point-cloud, saves as Scan.asc, recommended for inspection, fast export and post process.
0 comments
Simply put, there is nothing budget about this scanner—especially if you don’t have a mondo PC to run it, which will have to be added to the cost of acquisition, but comparing the Einstar against the Revopoint, and Creality offerings is like comparing a Ferrari vs. a Kia—it’s an insult to the Ferrari. If you are using scanner with internet, you will get a notice when a new software is release. And, we also suggest you to get a free user account on passport.shining3d.com to bind your scanner, so you can get the latest software and other related tutorials. The easy-to-use 3D scanner is easy to set up. It only requires a USB cable: This is used for both data transfer and power supply ("plug-and-play"). It has a friendly user interface with an elegant workflow for scanning and post-processing on the PC. It also has a detail-oriented design Improvement technology built in. This makes it easier to control the scanner with a data quality indicator and helps to improve the data quality! The scanner has a rectangular, boxy shape, and doesn’t have a special “gripping” zone (there’s just a wrist strap to avoid dropping it). You have to hold it from the tip of your fingers while being careful not to wrap them around the front side of the scanner. It’s not a very comfortable hand position, we felt a strain on top of the hand and wrist after just a few minutes of scanning. Not great for long scanning sessions, but fine for small/medium size objects or parts. Software and computer requirements In terms of time, it took us about 10 minutes for the first project and a little under 5 minutes for the second one (the lion’s underside). The auto alignment was almost instantaneous, auto hole filling took a few seconds, and the texture remapping took about a minute.
Great Deal 
New Comment