PEBA Crimping Pliers Connector Set- 18 Styles JST-XH 2.5mm Connectors and Crimp Pins Assortment Kit, JST Crimping Pliers 0.05-0.5mm²/AWG 30-20 for JST(XH/SM/PH/SYP), Dupont Connectors

Product Information

I just believe the four step can deal a little better with things like a wire that is too small for the connector, or too large, and/or a broader range of connectors, or etc. I came across IWISS IWS-3220 a few years ago and was amazed, the jaws are stepped so it only takes one crimp, after you set the connector into the jaw and squeeze gently they lock allowing you to insert the wire without worrying about the pressure on the handles and a big item is the notch on the connector that locks it in place, they catch it and hold it outside of the jaw. But I was surprised to see what he said about the PA09, I would guess poor tolerance on the terminals or excessive wear on the tool.

When you need to crimp a single pin, especially if that's new - unknown pin, and especially to "not the default size" wire PA09/20/21 are indispensable. Also, an additional (hard learned) tip: feel free to go all hulk on crimping the bare wire wings (the first crimp), but use a gentler touch with the second crimp, especially with solid core wire. Insert your stripped wire, give it a satisfying squeeze and the resulting crimp will hug the wire strands and insulator perfectly every time. Frustrates me when I am looking for information and I have to filter through 3 paragraphs (or 10 minutes if it is a video) of introductions and backgrounds before getting to the meat of the subject. From JST a durable, reliable and easy to use hand operated crimping tool made from high quality materials.Now if I need to do a 100 terminals, all same, all same size wire, the "dual" tools like iwiss are faster. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice.

This WCE-2210 hand crimp tool has a ratchet release, three crimping nests (AWG 22-16, AWG 16-14 and AWG 12-10) contact positioning and precisely ground profiles. I probably need to make a wire ruler and mark exactly how far the wire goes in for each different connector. Terminal crimping tool featuring a rugged construction suitable for use with JST terminals and making your own servo leads.I’ve compared the crimps resulting from my Engineer PA-09 to the Molex crimper at work, and had favorable results. Many tools later and a large collection of connectors and wire, I like making my own gear for the robotics I work on, and the networks that support them. Use the end of the crimper to bend the out wings in just a little bit so that it can fit into the crimp tool. Long-Lasting] Conductor and insulation sheath are concurrently crimped by the double-layer jaw, which has a precise crimp effect, long service life, and high quality. I’ve had good luck with the IWiss Crimpers though my biggest problem is I don’t get the wire in far enough or too far in.