ARCELI Mega 2560 Pro Mini Built-in, MCU ATmega2560, USB CH340G Electronics

Product Information

The voltage regulator allows to use up to 12 volt as an input value, however we do not recommend exceeding the recommended values aforementioned, since this can lead to excessive heat and damage the device. Then select the correct COM port (you can see the corresponding COM port after the driver is successfully installed). This defines the name, zone, object type and also the details of the slave processor it is hosted or controlled by.

It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. To compress the Mega 2560 into the smaller package of the Pro version, the DC power connector was deleted, the large USB connector was changed to a micro USB and the I/O pins are doubled up. The Arduino Mega Pro (Embed) CH340G / ATmega2560 board is based on the ATmega2560 microcontroller and the USB-UART adapter CH340 and is compatible with Arduino Mega 2560, with identical functionality. Note that these pins are not in the same location as the TWI pins on the old Duemilanove or Diecimila Arduino boards.When coupled with our Mega 2560 Pro MCU Proto Board, it makes for a very flexible platform for larger projects.

Ideal for powering most initial projects, but note that higher input voltages result in lower outgoing current. Rather then requiring a physical press of the reset button before an upload, the Mega 2560 is designed in a way that allows it to be reset by software running on a connected computer.

Advice is offered on a "best effort" basis and we will do our very best to offer you pertinent advice based on the information that you provide.

The second board functionality that will be replicated is that of the Smartisant Arduino Shield SHLD1, which is described in a lot more detail here.Instead, we offer a 'dead on arrival' warranty, which means we'll only offer a refund or replacement if the battery was tested and deemed to be malfunctioning on arrival. It uses the original ATmega2560-16AU chip, a 16 MHz high-quality quartz resonator, and the CH340G USB-UART interface. The RX and TX LEDs on the board will flash when data is being transmitted via the ATmega8U2/ATmega16U2 chip and USB connection to the computer (but not for serial communication on pins 0 and 1). Compact Size: Measuring just 38x55mm, it’s perfect for projects where space is a premium without compromising on functionality. The voltage regulator allows up to 18V input, however, we do not recommend exceeding 9V since the higher voltage can lead to overheating and damage the device.