Thermal Grizzly - Kryonaut thermal paste - For cooling all processors, graphics cards and heat sinks in computers and consoles (2 Grams)

Product Information

Arguably some of that is probably due to extra airflow from the case fans, but frankly I am very happy with that part of the build. Usually, the higher viscosity would mean that the thermal paste would not bleed or disappear quickly. It only follows, then, that we'd caution you against spending big on a brand new paste that'll only make a temperature difference of 1 to 2 Kelvin. I used this on my 7950x and it runs at a nice 45 degrees and under stress doesn't go above 70 degrees at 5750Mhz on a custom water cooled loop. A little thicker than the usual paste but no problems applying and again no risk of shorting components around the cpu lid.

In case you find this thermal paste (from 9ml container) hard to apply, keep in mind that viscosity is temperature bound. e. it requires multiple phases of heating up and cooling back down to room temperature, but finally provides better thermal conductivity than usual pastes. The goal is to supply the overclocker scene with high-performance thermal conductivity products, which are still a weak point - but the product portfolio can also be used for better and quieter cooling of gaming computers, workstations, mini-PCs and many other purposes. This thread in the OC UK forums is still carrying on a discussion of which is the best of the latest pastes.As for accessories, the 1g tube of Kryonaut comes with an instruction manual and an applicator spatula. There's plenty of room inside for good airflow around components therefore I haven't felt the need to add to the two included case fans as the case design allows for good passive airflow. Compared to the Kryonaut thermal paste, the finer basic particles of the Kryonaut Extreme ensure a lower risk of it being caused by the high temperature differences with nitrogen cooling"cracking" occurs and the thermal conductivity is impaired. uk/images/product_images/main/293/thermal-grizzly-kryonaut-extreme-thermal-compound-3384-grams--90--zuwa-208-73810-1.

Cleaned my Ryzen 7950 and Rog Ryujin 360 aio with isopropyl alcohol, applied the paste in a thin layer and. As for the cost, Kryonaut can be found for about 12 USD for a 1g tube and Kryonaut Extreme for approximately 30 USD for 2g. The Kryonaut is available in quantities ranging from 1g to 37g, while the Kryonaut Extreme comes in sizes from 2g to 33. The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products.PCPartPicker may receive compensation for purchases made at participating retailers linked on this site. You can use the spatula to evenly spread the paste or apply X form in which case the mounting pressure would optimally spread the paste. I can only say that this thermal paste is doing an incredible job together with the fans and the Cooler AIO of my computer, it has a very well balanced cooling, without a doubt, it deserves a good rating for the good teamwork.

With CPUs rated at more than 100W of heat output, single graphics boards carrying similar ratings (and people want to run two! However, after some thermal cycles, also known as “curing time”, both versions of Kryonaut showed a decrease in performance, with an increase of about 2 K in delta temperature. With a passion for all things tech, Nauman has been an essential part of the Enos Tech team now for a number of years.WCUK Online Ltd is authorized and regulated by the Financial Conduct Authority (FRN 824034) and acts as a credit intermediary.