Gelli Arts GL8X10 8"x10" Plate, Multicolour

Product Information

Always ready to print – When you’re in the mood to print, the Gelli Arts® printing plate is ready for you to use! You will need a gelli-plate, acrylic or fabric paints, a roller or brayer, things to mark make with (such as credit cards, forks, corrugated paper etc) and paper or fabric to print onto. Not recommended to use with dyes when printing on the plate as the gel plate will absorb some of the dye and become permanently stained. A lengthy archaeological report was published in 1906, [1] but little remains of the site, with much destroyed during the construction of the Nant y Gwyddon refuse tip.

The gel plate will leach a small amount of harmless mineral oil when left sitting on an absorbent surface. Our extensive range has over 28,000 products, which are constantly tried and tested by our in-house experts, teachers, and artists.We recommend you protect your work surface by placing your gel printing plate on a smooth, flat, non-porous barrier such as a Teflon® sheet, baking tray or piece of glass. We do not recommend using dyes when printing on the plate (such as rubber stamp inks, spray inks and fabric dyes) as the gel will absorb some of the dye and become permanently stained. Oil paints can be cleaned from the gel printing plate with baby oil and wiped clean with a paper towel.

The reports resulted in a full scale environmental report, [4] and the decision by the local authorities to cease the dumping of domestic waste at the site. Unleash your artistic vision and experiment with a wide range of mediums, accompanied by Gelli Arts' dedicated printmaking tools Read more.Alternatively, you could create a detailed print using absolutely anything (bubble wrap, leaves, feathers etc. We recommend keeping the original pieces of clear plastic film and replacing them on the gel plate for storage. If there is paint left on the plate you can use a sheet of scrap paper to pull it off in the same way as you take a print.

It is easy to make fun textures with these Gelli Arts Gel Printing Plates with bubble wrap, plastic grids, foam stamps, stencils, leaves and string to create interesting imagery on your plate. Also experiment with string, soft textures, brushes, stencils and more to craft unique artwork and prints. For hand-drawn marks use soft-tipped tools like paintbrushes, cotton tipped swabs or soft rubber-tipped tools.There are lots of books out there on Gelli Plate Printing – This one has to be one of our favourites: Gelli Plate Printing: Mixed-Media Monoprinting Without a Press by Joan Bess. Do not use pointy tools such as pencils and toothpicks as they may scratch the gel plate surface and leave permanent marks. g. rubber stamp inks, spray inks or fabric dyes) as the gel will absorb some of the dye and become stained. If your package does not arrive Royal mail requires us to wait for 14 working days before we are able to raise a claim.

Produce your own designs by making marks and pressing textured objects into the wet paint on the plate.

Do not cover gel printing plate with plastic wrap or waxed paper as these wraps will wrinkle and imprint on your gel printing plate. Gelli-plate printing is one of my favourite techniques, giving fabulous results both expected and unexpected. These Gelli Arts Gel Printing Plates have an extremely sensitive surface and will imprint any texture they are sitting on or covered with - avoid plastic wrap, waxed paper or glossy photo paper!